User's Manual

37
Disable WPS: Click on to disable the Wi-Fi Protected Setup function.
WPS Status: Show WPS status is Configured or UnConfigured.
Self-PIN Number: Fill in the PIN Number of AP to register the wireless distribution
system access capability.
Push Button Configuration: The Start PBC button provides tool to scan the
wireless network. If any Access Point or IBSS is found, you could connect it
automatically when client join PBC mode.
Apply Changes: Click the Apply Changes button to complete the new
configuration setting.
Reset: Click the Reset button to abort change and recover the previous
configuration setting.
Current Key Info: Authentication-It shows the Authentication is opened or
closed. Encryption-It shows the Encryption mode. Key-It shows the Encryption
key.
Client PIN Number: Fill in the Client PIN Number from your Client sites.
3.4.8 Schedule
This page allows you setup the wireless schedule rule. Please do not forget to
configure system time before enable this feature.