Wireless 54Mpbs USB 2.0 Adapter Wireless 54Mpbs USB 2.
Wireless 54Mpbs USB 2.0 Adapter FCC Warning This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication.
Wireless 54Mpbs USB 2.0 Adapter Contents 1. Introduction ............................................................................................................ 4 1.1 Features ...............................................................................................................................4 1.2 Package Contents ................................................................................................................4 1.3 LED Indicator ................................................
Wireless 54Mpbs USB 2.0 Adapter 1. Instruction Congratulations on purchasing this Wireless 54Mbps USB 2.0 Adapter. Wireless 54Mbps USB 2.0 Adapter is a convenient Plug & Play USB 2.0 solution that brings wireless networking to your laptop or desktop PC. It provides up to a 128-bit level of WEP security to your wireless data transfers. The wireless USB 2.
Wireless 54Mpbs USB 2.0 Adapter 2. IP Address To use the Wireless 54 Mpbs USB Adapter with a computing device, the Wireless 54 Mpbs USB Adapter must be equipped with an USB 1.1 or 2.0 Interface. All drivers and supporting software for the Wireless 54 Mpbs USB Adapter need to be loaded and configured first.
Wireless 54Mpbs USB 2.0 Adapter 3. Install Driver/Utility 3.1 For Windows XP & Windows 2000 Step1: Inset Wireless LAN USB Adapter Installation CD into CD-ROM drive then windows below will appear. Click Install Driver Utility to begin Driver Installation. Step2: After click Install Driver Utility, the Welcome dialog will show as below. Please click Next to continue.
Wireless 54Mpbs USB 2.0 Adapter Step 3: Setup Wireless LAN Driver and Utility, please click Next. Step 4: Start copying files until it finishes the installation.
Wireless 54Mpbs USB 2.0 Adapter Step 5: Click Finish to complete installation. Step 6: After finished install driver and utility on your system, you will see the connection icon in the system tray. .
Wireless 54Mpbs USB 2.0 Adapter 3.2 For Windows ME Step1: Inset Wireless LAN USB Adapter Installation CD into CD-ROM drive then windows below will appear. Click Install Driver Utility to begin Driver Installation. Step2: After click Install Driver Utility, the Welcome dialog will show as below. Please click Next to continue.
Wireless 54Mpbs USB 2.0 Adapter Step 3: Setup Wireless LAN Driver and Utility, please click Next. Step 4: Select 802.11 USB Wireless Lan Card and click Next to continue.
Wireless 54Mpbs USB 2.0 Adapter Step 5: Select Yes, I want to restart my computer now and click Finish to complete installation process. Step 6: After reboot your computer, Windows System will pop-up the message and ask you to restart your computer for finishing set up your new hardware. Please click YES to restart again. Step 7: After finished install driver and utility on your system, you will see the connection icon in the system tray.
Wireless 54Mpbs USB 2.0 Adapter 3.3 For Windows 98SE Step1: Inset Wireless LAN USB Adapter Installation CD into CD-ROM drive then windows below will appear. Click Install Driver Utility to begin Driver Installation. Step2: After click Install Driver Utility, the Welcome dialog will show as below. Please click Next to continue.
Wireless 54Mpbs USB 2.0 Adapter Step 3: Setup Wireless LAN Driver and Utility, please click Next. Step 4: Choose 802.11 USB Wireless Lan Card and click Next to continue installation.
Wireless 54Mpbs USB 2.0 Adapter Step 5: Click Next to begin WMI Installation Wizard. Step 6: After read the License Agreement, select I accept this agreement and click Next to continue the installation.
Wireless 54Mpbs USB 2.0 Adapter Step 7: Click Next to start the installation. Step 8: After completed the WMI installation wizard, click Finish to close the wizard.
Wireless 54Mpbs USB 2.0 Adapter Step 9: This system (WMI) must be restarted to complete the installation. Please click OK to restart your computer. Step 10: Wireless LAN Driver Setup Wizard will also ask to restart computer to complete the setup. Choose Yes, I want to restart my computer now and click Finish to reboot the computer. Step 11: After reboot your computer, Windows System will pop-up the message and ask you to restart your computer for finishing set up your new hardware.
Wireless 54Mpbs USB 2.0 Adapter 4. Wireless Network Configuration There are two different ways to configure Wireless LAN USB Adapter on your system. They are alike in functionality. Therefore, you can choose any one of them which you prefer to use. Method 1 – Configured at Windows XP Configuration Step 1: After installing driver and utility on your system, let’s start to setup your wireless LAN card.
Wireless 54Mpbs USB 2.0 Adapter Step 1: Plug-in wireless card and you will see SiS utility appears on your system tray. Step 2: Double-Click on the crab icon ( ) and an 802 11b/g USB Wireless LAN Adapter dialog box will appear. [NetStatus] The NetStatus tab shows the Link Status, Network Mode, SSID, Channel, Tx Rate.
Wireless 54Mpbs USB 2.
Wireless 54Mpbs USB 2.0 Adapter [Statistics] The Statistic tab allows you to check the Link State, signal Strength, and the Transmitting/Receiving Statistics data. If you check the Turn Radio OFF, then any radio activity will be turned off.
Wireless 54Mpbs USB 2.0 Adapter [Encryption] If there are several wireless networks co-existing, you have to consider about data encryption which depends on your Access Point security configuration. The setting of security KEY shall be done on both of your Wireless LAN USB Adapter and Access Point. The wireless connection will fail if any security setting does not match. Select the Encryption tab and set the Data Encryption to WEP if you want to enable the function.
Wireless 54Mpbs USB 2.0 Adapter [Info] The Info tab shows the Driver Version including the detailed configuration Utility and NIC firmware version. Users will need this information when reporting their problems for technical support.
Wireless 54Mpbs USB 2.0 Adapter [Profile] The Profile tab will allows you to save and retrieve the information associated with a specific setting, so you can quickly and easily connect to your network when you are in that location. The Profile page allows you to create a new profile, delete an old profile or edit your exiting profile.
Wireless 54Mpbs USB 2.0 Adapter 5. Troubleshooting Symptom: The LED is off. Remedy: Make sure the USB Adapter is inserted properly. Otherwise contact your vendor. Symptom: The LED is always on not blinking Remedy: Make sure that you have installed the driver from attached CD. Otherwise contact your vendor. Symptom: The LED is blinking but the USB Adapter icon does not appear in your icon tray.. Remedy: Make sure that you have installed the Utility from the attached CD.
Wireless 54Mpbs USB 2.0 Adapter 6. Glossary IEEE 802.11 Standards The IEEE 802.11 Wireless LAN Standards Subcommittee, which is formulating a standard for the industry. Access Point An internetworking device that seamlessly connects wired and wireless networks together. Ad Hoc An Ad Hoc wireless LAN is a group of computers, each with a WLAN adapter, connected as an independent wireless LAN. Ad Hoc wireless LAN is applicable at a departmental scale for a branch or SOHO operation.
Wireless 54Mpbs USB 2.0 Adapter IEEE Institute of Electrical and Electronics Engineers. Infrastructure An integrated wireless and wired LAN is called an Infrastructure configuration. Infrastructure is applicable to enterprise scale for wireless access to central database, or wireless application for mobile workers. ISM Band The FCC and their counterparts outside of the U.S. have set aside bandwidth for unlicensed use in the so-called ISM (Industrial, Scientific and Medical) band.
Wireless 54Mpbs USB 2.0 Adapter Static IP Addressing A method of assigning IP addresses to clients on the network. In networks with Static IP address, the network administrator manually assigns an IP address to each computer. Once a Static IP address is assigned, a computer uses the same IP address every time it reboots and logs on to the network, unless it is manually changed. Temporal Key Integrity Protocol (TKIP) The Temporal key Integrity Protocol, pronounced tee-kip, is part of the IEEE 802.
Wireless 54Mpbs USB 2.0 Adapter Wireless LAN (WLAN) A wireless LAN does not use cable to transmit signals, but rather uses radio or infrared to transmit packets through the air, Radio Frequency (RF) and infrared are the commonly used types of wireless transmission. Most wireless LANs use spread spectrum technology.
