User guide

Installation Instructions
Suzuki Grand Vitara
Suzuki Vitara (Includes XL-7)
Chevrolet Tracker (2 & 4 Dr.)
Part Numbers:
51152
Hitch Shown In Proper Position
Equipment Required:
Wrenches: 14mm, 18mm
Drill Bits: None
1. Remove tie down bracket and bolts on driver’s side and return to vehicle owner.
2. Raise hitch into position, and using existing weldnuts, install four (4) M12 bolts as shown above.
Tighten all M12 x 1.25 CL8.8 fasteners with torque wrench to 76 Lb.-Ft. (103 N*M)
Rev. A8-17-0951152NSheet 1 of 3
z 2009 Cequent Performance Products
Conical Toothed Washer ½”Qty. (4)
2
Hex Bolt M12 x 1.25 x 30mm CL8.8Qty. (4)
1
Note: check hitch frequently, making sure all fasteners and ball are properly tightened. If hitch is removed, plug all holes in trunk pan or other body panels to prevent
entry of water and exhaust fumes. A hitch or ball which has been damaged should be removed and replaced. Observe safety precautions when working beneath a
vehicle and wear eye protection. Do not cut access or attachment holes with a torch.
This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5 and
SAE J684.
Fastener Kit: 51152F
Do Not Exceed Lower of Towing Vehicle
Manufacturer’s Rating or
350 (159 Kg.)3500 (1589 Kg.)
Weight Carrying
Ball Mount
Do Not Use With Spring Bars
Weight Distributing
Max Tongue
WT (LB)
Max Gross
Trailer WT (LB)
Hitch type
Wiring Access Location: SUV3
Form: F205 Rev A 5-6-05
Frame Rail
Fascia
Frame Rail
Existing Weldnuts
Tie Down Bracket
And Bolts
21
Fasteners Typical
Both Sides