Instructions / Assembly

ITEM# TOWERINT Scaffolding Assembly & Operating Instructions

STEP 1

Attach side brace B to two frames A:

• Pull L-shape lock pin at each end of side

brace to the disengaged position.

(See Figure B)

• While holding L-shape pin in disengaged

position, place U-channel on each end of

side brace B around leg of frame A at

desired platform height.

• Release lock pin and be sure that pin fully

engages into hole in frame A leg

• Install Connector Pins F under Lock Pin

on all four sides.

Lock Pin Is Disengaged (Unlocked Position)

Lock Pin Is Fully Engaged (Locked Position)

Figure B

STEP 2

Attach second side brace B to both frames A (REPEAT INSTRUCTIONS IN STEP 1).

WARNING:

• BOTH SIDE BRACES MUST BE POSITIONED AT THE SAME HEIGHT ON THE FRAMES

SO THAT THE PLATFORM WILL BE LEVEL.

• BE SURE ALL 4 L-SHAPE LOCK PINS ARE FULLY ENGAGED IN HOLES OF FRAMES.

• REMOVE THE PLATFORM BEFORE ADJUSTING THE DECK LEVEL.

STEP 3

Install platform C on side braces B so that platform is fully seated within inner channel on top of side

braces.

STEP 4

Rotate the platform clips into the engaged

position. (See Figure C)

Figure C

STEP 5

Install 4 casters D into legs of frames A and with Connector Pins F.