Use and Care Manual

ITEM # PC3000 Plate Compactor Instruction Manual

• Spark advance/retard system.

(4) Exhaust Gas Recirculation (EGR) System

• EGR valve body, and carburetor spacer if applicable.

EGR rate feedback and control system.

(5) Air injection System

• Air pump or pulse valve..

• Valves affecting distribution of flow.

• Distribution manifold

(6) Catalyst or Thermal Reactor.System

• Catalytic converter..

• Thermal reactor..

• Exhaust manifold. (7) Particulate Controls

• Traps, filter, precipitators, and any other device used to capture particulate emissions.

(8) Miscellaneous items Used in Above Systems

• Vacuum, temperature, and time sensitive valves and switches.

• Electronic controls.

• Hoses, belts, connectors, and assemblies.

(9) Evaporative Controls

• Fuel Tank

• Fuel Cap

• Fuel Lines (for liquid fuel and fuel vapors)

• Fuel Line Fittings

• Clamps**

• Pressure Relief Valves**

• Control Valves**

• Control Solenoids**

• Electronic Controls**

• Vacuum Control Diaphragms**

• Control Cables**

• Control Linkages**

• Purge Valves

• Gaskets

• Liquid/Vapor Separator

• Carbon Canister

• Canister Mounting Brackets

• Carburetor Purge Port Connector

**Note: As they relate to the evaporative emission control system.

Note: Any other warranty statements apply to engines or equipment units shall not limit the emissions warranty period (two years) or

its applicability to subsequent owners after the ultimate purchaser.

201906