Instructions / Assembly

ManualsBrandsPRO-SERIES ManualsBuilding materials31 in. Adjustable Stem Jack

Scaffolding

Assembly & Safety Instructions

READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.

This manual provides important information on proper operation and maintenance. Every effort has been

made to ensure the accuracy of this manual. We reserve the right to change this product at any time

without prior notice.

STOP! DO NOT RETURN THIS PRODUCT TO THE RETAILER.

Questions? Problems? CONTACT CUSTOMER SERVICE.

If you experience a problem or need parts for this product, visit our website http://www.buffalotools.com

or call

our customer help line at 1-888-287-6981, Monday-Friday, 8 AM - 4 PM Central Time. A copy of the sales

receipt is required.

WARNING: Improper erection, dismantling or use of Scaffold may result in serious injury or death!

Erectors, dismantlers, and users of Scaffold must read and fully understand these Safety Rules and

Instructions.

MAXIMUM LOAD CAPACITY: 1,000 lbs (Workers & Materials)

WARNING: DO NOT OVERLOAD SCAFFOLD! IT MAY RESULT IN SERIOUS INJURY!

Summary of content (5 pages)

PAGE 1
Scaffolding Assembly & Safety Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper operation and maintenance. Every effort has been made to ensure the accuracy of this manual. We reserve the right to change this product at any time without prior notice. STOP! DO NOT RETURN THIS PRODUCT TO THE RETAILER. Questions? Problems? CONTACT CUSTOMER SERVICE.
PAGE 2
Recommended Scaffolding Erection Procedure Introduction This Guide has been prepared by the Scaffolding, Shoring & Forming Institute to assist contractors, architects, engineers, dealers, erectors, and users, etc. for the proper use of scaffolding equipment. Scaffolding Safety Rules published by the Institute should be used in conjunction with this publication, as well as the instruction for the use of scaffolding provided by the manufacturer.
PAGE 3
Safe Bearing Loads For Soils Considering that the allowable loads (bearing) on various soils and rock range from less that 1,000 p.s.f. to more than 50,000 p.s.f. care should be exercised in determining the capacity of the soil for every scaffolding job, realizing that weather conditions can turn an otherwise suitable ground condition into a hazardous situation. As an example, dry clay with an allowable bearing capacity of 8,000 p.s.f.
PAGE 4
CODE OF SAFE PRACTICES FOR FRAME SCAFFOLDS, SYSTEM SCAFFOLDS, TUBE AND CLAMP SCAFFOLDS & ROLLING SCAFFOLDS DEVELOPED FOR INDUSTRY BY SCAFFOLD INDUSTRY ASSOCIATION, INC. It shall be the responsibility of all users to read and comply with the following common sense guidelines which are designed to promote safety in the erecting, dismantling and use of Scaffolds.
PAGE 5
1. 2. 3. Brackets for SYSTEM SCAFFOLDS shall be installed and used in accordance with manufacturer’s recommendations. Brackets for FRAME SCAFFOLDS shall be seated correctly with side bracket parallel to the frames and end brackets at 90 degrees to the frames. Brackets shall not be bent or twisted from normal position. Brackets (except mobile brackets designed to carry materials) are to be used as work platforms only and shall not be used for storage of material or equipment.