Installation Guide

READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.

This manual provides important information on proper operation and maintenance. Every effort has been

made to ensure the accuracy of this manual. We reserve the right to change this product at any time without

prior notice.

STOP! DO NOT RETURN THIS PRODUCT TO THE RETAILER.

Questions? Problems? CONTACT CUSTOMER SERVICE.

If you experience a problem or need parts for this product, visit our website http://www.buffalotools.com or

call our customer help line at 1-888-287-6981, Monday-Friday, 8 AM - 4 PM Central Time. A copy of the

sales receipt is required.

Revised 200912

HTMULT

Multi-Use Truck Rack

Assembly & Operating Instructions

PAGE 1
HTMULT Multi-Use Truck Rack Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper operation and maintenance. Every effort has been made to ensure the accuracy of this manual. We reserve the right to change this product at any time without prior notice. STOP! DO NOT RETURN THIS PRODUCT TO THE RETAILER. Questions? Problems? CONTACT CUSTOMER SERVICE.
PAGE 2
Multi-Use Truck Rack HTMULT Assembly and Operating Instructions Verify that you have received the hardware and parts in the correct quantities as shown below and on the following page.
PAGE 3
Do not exceed 250 lb. weight capacity distributed evenly across both frames. Be aware of dynamic loading! Load movement could cause excess load, causing product failure. Strap ladder securely to rack. When expanding the Arm, leave approximately 2.5” of the tube in the frame. L 2 Choose the left or right side to mount the Multi-Use Truck Rack.
PAGE 4
Step 5 With the Upright Support inserted, attach the Rear Upright Support Bracket using 2 bolts (A), 2 washers (D), 2 lock washers (E), and 2 nuts (F). With the foot of the Upright Support (6) plumb, mark and drill two holes in the truck bed. Attach the foot to the truck bed using 2 bolts (A), 2 washers (D), 2 lock washers (E), and 2 nuts (F). 8 Adjustable Arm Step 6 Assemble the upper arm (FIG 4) using button head bolts (G), flat washers (K) and lock nuts (J).