Owner`s manual

ManualsBrandsPro-Team ManualsDomestic AppliancesPROGUARD 15

*The ProGuard 15 and 20 are shown with optional front mount squeegee.

107185 Squeegee Accessory Sold Separately.

SP6777-1 ProGuard ESF 4/18/11 10:30 AM Page 1

Summary of content (48 pages)

PAGE 1
SP6777-1 ProGuard ESF 4/18/11 10:30 AM Page 1 *The ProGuard 15 and 20 are shown with optional front mount squeegee. 107185 Squeegee Accessory Sold Separately.
PAGE 2
SP6777-1 ProGuard ESF 4/18/11 10:30 AM Page 2 Read all instructions before using. Save these instructions. Following the cleaning instructions will prolong the life of your ProTeam Vacuum. Lea todas las instrucciones antes de utilizar la aspiradora. Guarde estas instrucciones. Si se siguen las instrucciones de limpieza, se prolongará la vida útil de la aspiradora ProTeam. reference info Lisez toutes les instructions avant d’utiliser. Conservez ces instructions.
PAGE 3
SP6777-1 ProGuard ESF 4/18/11 10:30 AM Page 3 Table of Contents Important Safety Instructions / Instrucciones de seguridad importantes / Consignes de sécurité importantes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4 Introduction / Introducción / Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 4
SP6777-1 ProGuard ESF P R O G U A R D 10 P R O G U A R D 15 & 20 P R O G U A R D 10 H E P A 4/18/11 10:30 AM Page 4 IMPORTANT SAFETY INSTRUCTIONS Including Model Numbers: 1071290, 1071300, 1071310, and 1071830. Safety is a combination of using common sense, staying alert, and knowing how your Wet/Dry Vacuum cleaner works. Safety Signal Words DANGER: Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
PAGE 5
SP6777-1 ProGuard ESF 4/18/11 10:30 AM Page 5 IMPORTANT SAFETY INSTRUCTIONS (continued) • Turn off Vacuum before unplugging. • To reduce the risk of injury from accidental starting, unplug power cord before changing or cleaning filter. • Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord. • Do not use with damaged cord, plug, or other parts.
PAGE 6
SP6777-1 ProGuard ESF P R O G U A R D 10 P R O G U A R D 15 & 20 P R O G U A R D 10 H E P A 4/18/11 10:30 AM Page 6 IMPORTANT SAFETY INSTRUCTIONS (continued) INSTRUCCIONES DE SEGURIDAD IMPORTANTES ! CAUTION: • To reduce the risk of hearing damage, wear ear protectors when using for extended time or in a noisy area. • For dusty operations, wear dust mask. • Static shocks are common when the relative humidity of the air is low.
PAGE 7
SP6777-1 ProGuard ESF 4/18/11 10:30 AM Page 7 IMPORTANT SAFETY INSTRUCTIONS (continued) INSTRUCCIONES DE SEGURIDAD IMPORTANTES The following safety instructions apply specifically to the Las siguientes instrucciones de seguridad se aplican específicamente a la ProGuard 10 HEPA: ProGuard 10 HEPA: ! WARNING: To reduce the risk of exposure to hazardous materials: • When using for EPA RRP cleanup tasks, use only ProTeam Certified HEPA Filter, 107179.
PAGE 8
SP6777-1 ProGuard ESF P R O G U A R D 10 P R O G U A R D 15 & 20 P R O G U A R D 10 H E P A 4/18/11 10:30 AM Page 8 Introduction Introducción Introduction GROUNDING INSTRUCTIONS INSTRUCCIONES DE CONEXIÓN A TIERRA INSTRUCTIONS RELATIVES À LA MISE À LA TERRE WARNING – Improper connection of the equipment-grounding connector conductor can result in a ADVERTENCIA – Una conexión incorrecta del conductor del conector de conexión a tierra del equipo puede THESE VACUUMS MUST BE GROUNDED.
PAGE 9
SP6777-1 ProGuard ESF 4/18/11 10:30 AM Page 9 Preventive Maintenance Mantenimiento preventivo Maintenance préventive The following information is for use by qualified service personnel only and provides guidance for troubleshooting and maintenance. • Unplug the Vacuum when working on the motor or any electrical part. • Have a qualified service person at an authorized ProTeam Warranty Center check the carbon brushes.
PAGE 10
SP6777-1 ProGuard ESF P R O G U A R D 10 Figure A P R O G U A R D 15 & 20 P R O G U A R D 10 H E P A Figure B 4/18/11 10:30 AM Page 10 Preventive Maintenance Mantenimiento preventivo Maintenance préventive TROUBLESHOOTING 1. If the Vacuum will not operate, check the following: a. The power supply cord at the wall outlet. b.The power supply cord at the Vacuum. Check connection between pigtail plug & extension cord receptacle. Align prongs, press together and twist to lock parts together. c.
PAGE 11
SP6777-1 ProGuard ESF 4/18/11 10:30 AM Page 11 General Operation ! WARNING: To reduce the risk of fire, explosion, or damage to Vacuum: • Do not leave Vacuum running while unattended - you may fail to notice important signs indicating abnormal operation such as loss of suction, debris/liquid exiting exhaust, or abnormal motor noises. Immediately stop using Vacuum if you notice these signs. • Do not leave Vacuum plugged in when not in use. • Do not continue running when float has cut off suction.
PAGE 12
SP6777-1 ProGuard ESF P R O G U A R D 4/18/11 = OFF 10:30 AM = ON Connect pigtail plug to extension cord receptacle. Align prongs, press together, and twist to lock parts together. Utilización general Fonctionnement général Después de enchufar el cordón de energía en el tomacorriente, encienda la unidad empujando el interruptor de la posición “O” a la posición “l” (Figura A). Los símbolos utilizados en el accionador del interruptor son los símbolos internacionales de “encendido y apagado”.
PAGE 13
SP6777-1 ProGuard ESF 4/18/11 10:30 AM Page 13 Limited Warranty This limited warranty applies to the following ProTeam, Inc. commercial PROGUARD® Wet/Dry Vacuums (collectively, the “ProGuard Products”): ProGuard 10, 15, 20, and 10 HEPA If you have any questions or need assistance regarding the warranty of your product, please call ProTeam Customer Service department at (866) 888-2168 7:30 a.m. - 5:00 p.m. Mountain Time. PROGUARD® - Limited Warranty ProTeam, Inc., located at 12438 W.
PAGE 14
SP6777-1 ProGuard ESF P R O G U A R D 4/18/11 10:30 AM Page 14 Limited Warranty 10 THE LIMITED WARRANTIES PROVIDED ABOVE ARE THE SOLE AND EXCLUSIVE WARRANTIES PROVIDED BY PROTEAM TO THE ORIGINAL PURCHASER, AND ARE IN LIEU OF ALL OTHER WARRANTIES, WRITTEN OR ORAL, EXPRESS OR IMPLIED, WHETHER ARISING BY OPERATION OF LAW OR OTHERWISE, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, WHETHER OR NOT THE PURPOSE HAS BEEN DISCLOSED AND WHETHER OR NOT THE PROG
PAGE 15
SP6777-1 ProGuard ESF 4/18/11 10:30 AM (1) (2) Page 15 ProGuard 10 Carton Contents ProGuard 10 Contenido ProGuard 10 de la caja de cartón Contenu du carton OVERVIEW (Figure A) GENERALIDADES (Figura A) VUE D’ENSEMBLE (Figure A) • Extension Cord (2) • Cordón de extensión (2) • Cordon de rallonge (2) • Wet/Dry Vacuum Assembly (1) • Fine Dust Filter (Dry) (3) • Filter (Wet) (4)* • Dust Brush (5) • Crevice Tool (6) (4)* • Hose Assembly (7) • Floor Brush Tool (8) • Squeegee Tool (9) (3) • Owne
PAGE 16
SP6777-1 ProGuard ESF 4/18/11 10:30 AM Page 16 ProGuard 10 Wet/Dry Vacuum Assembly P R O G U A R D 1. Position the power head assembly on the tank assembly as shown. ProGuard 10 ProGuard 10 Ensamblaje de la aspiradora Assemblage de l’aspirateur para mojado/seco de liquides et de poussières 1. Posicione el cabezal del motor sobre el ensamblaje del tanque de la manera que se muestra en la ilustración.
PAGE 17
SP6777-1 ProGuard ESF 4/18/11 10:30 AM Page 17 ProGuard 10 Remoción ProGuard 10 Filter Removal & Installation e instalación del filtro PUSH DOWN PULL UP Rubber Gasket at Bottom of Filter (cutaway view) Figure A Figure B Qwik Lock™ Filter (Figure A) Filter Removal: 1. Hold the filter tabs of the Qwik-Lock Wet or Fine Dust Filter in each hand. 2. With one thumb on the Qwik Lock stud, which protrudes through the integrated filter plate, lift up on the filter tabs while pushing down on the stud. 3.
PAGE 18
SP6777-1 ProGuard ESF P R O G U A R D 4/18/11 10:30 AM PUSH DOWN Fine Dust Filter 10 PULL UP Rubber Gasket at Bottom of Filter (cutaway view) Figure A Page 18 ProGuard 10 Operation ProGuard 10 Utilización VACUUMING DRY MATERIAL 1. A Fine Dust Filter (or optional HEPA media filter) must always be installed correctly to reduce the risk of leaks and possible damage to the Vacuum. RECOGIDA DE MATERIALES SECOS ASPIRATION DE MATÉRIAUX SECS CON LA ASPIRADORA 1.
PAGE 19
SP6777-1 ProGuard ESF 4/18/11 10:30 AM INTERCEPT MICRO FILTER BAG FINE DUST FILTER WET FILTER Page 19 ProGuard 10 Operation ProGuard 10 Utilización ProGuard 10 Fonctionnement VACUUMING LIQUIDS NOTE: When picking up very small amounts of water, the Fine Dust Filter may be left in place. However, the Intercept Micro Filter bag MUST be removed. Even a very small amount of moisture can damage this bag and may cause it to break open.
PAGE 20
SP6777-1 ProGuard ESF P R O G U A R D 10 Figure A 4/18/11 10:30 AM Page 20 ProGuard 10 Operation ProGuard 10 Utilización ProGuard 10 Fonctionnement EMPTYING THE TANK (Figure A) VACIADO DEL TANQUE (Figure A) VIDAGE DU RÉSERVOIR (Figure A) ! WARNING: To reduce the risk of injury from accidental starting, unplug power cord before emptying the tank. ! ADVERTENCIA: Para reducir el riesgo de lesiones por causa de un arranque accidental, desenchufe el cordón de alimentación antes de vaciar el tanque.
PAGE 21
SP6777-1 ProGuard ESF 4/18/11 10:30 AM To Reorder Intercept Micro Filters: Go to www.pro-team.com or contact ProTeam’s Customer Service Department at 866.888.
PAGE 22
SP6777-1 ProGuard ESF 4/18/11 10:30 AM Page 22 ProGuard 10 Filter Maintenance P R O G U A R D NOTE: The Fine Dust Filter is made of high quality paper designed to stop very small particles of dust. The Fine Dust Filter can be used for small quantity wet pickup. Handle the filter carefully when removing to clean it or when installing it. Creases in the filter pleats may occur during installation but will not affect the performance of the filter.
PAGE 23
SP6777-1 ProGuard ESF 4/18/11 10:30 AM Page 23 10 Gallon Wet/Dry Vacuum Assembly Repair Parts Assembly All items sold as each's unless otherwise identified 38 2 3 39 6 1 4 5 7 9 11 12 40 10 16 8 41 42 14 15 43 16 13 44 17 45 18 46 19 20 47 21 48 23 24 49 25 22 32 26 31 30 28 35 27 34 29 33 36 37 NO.
PAGE 24
SP6777-1 ProGuard ESF P R O G U A R D 10 4/18/11 10:30 AM Page 24 Ensamblaje de piezas de repuesto NO.
PAGE 25
SP6777-1 ProGuard ESF 4/18/11 10:30 AM (2) (1) Page 25 ProGuard 15 & 20 Carton Contents ProGuard 15 & 20 Contenido de la caja de cartón ProGuard 15 & 20 Contenu du carton OVERVIEW (Figure A) GENERALIDADES (Figura A) VUE D’ENSEMBLE (Figure A) • Handle (2) • Asa (2) • Poignée (2) • Wet/Dry Vacuum Assembly (1) (3) • Cart Base (3) • Extension Cord (4) • Hardware Bag (5) • Filter (Wet) (6)* • Fine Dust Filter (Dry) (7) • Dust Brush (8) • Crevice Tool (9) • Hose Assembly (10) • Floor Brush To
PAGE 26
SP6777-1 ProGuard ESF 4/18/11 10:30 AM CENTER WHEEL CONFIGURATION P R O G U A R D 15 & 20 TRADITIONAL WHEEL CONFIGURATION Figure A = BOLTS Page 26 ProGuard 15 & 20 Cart Assembly ProGuard 15 & 20 Ensamblaje del carrito ProGuard 15 & 20 Assemblage du chariot CART ASSEMBLY (Figure A) ENSAMBLAJE DEL CARRITO (Figura A) El carrito que se incluye con estas aspiradoras ProGuard se puede utilizar en dos configuraciones muy diferentes.
PAGE 27
SP6777-1 ProGuard ESF 4/18/11 10:30 AM Page 27 ProGuard 15 & 20 Cart Assembly ProGuard 15 & 20 Ensamblaje del carrito ProGuard 15 & 20 Assemblage du chariot HANDLE ASSEMBLY (Figure A) ENSAMBLAJE DEL ASA (Figura A) ASSEMBLAGE DE LA POIGNÉE (Figure A) If any parts are missing or damaged, contact ProTeam Customer Service. Do not assemble until you have all the parts. 1. The push handle is attached to the base with 3/8" bolts and nuts. 2. Position the handle over the base handle receivers as shown.
PAGE 28
SP6777-1 ProGuard ESF 4/18/11 10:30 AM Page 28 ProGuard 15 & 20 Wet/Dry Vacuum Assembly 1. Position the power head assembly on the tank assembly as shown. ProGuard 15 & 20 ProGuard 15 & 20 Ensamblaje de la aspiradora Assemblage de l’aspirateur para mojado/seco de liquides et de poussières 1. Posicione el cabezal del motor sobre el ensamblaje del tanque de la manera que se muestra en la ilustración.
PAGE 29
SP6777-1 ProGuard ESF 4/18/11 10:30 AM Page 29 PUSH DOWN PULL UP Rubber Gasket at Bottom of Filter (cutaway view) Figure A HANDLE REMOVED FOR CLARITY Figure B ProGuard 15 & 20 Filter Removal & Installation ProGuard 15 & 20 Remoción e instalación del filtro ProGuard 15 & 20 Retrait et installation du filtre Qwik Lock™ Filter (Figure A) Filter Removal: 1. Hold the filter tabs of the Qwik-Lock Wet or Fine Dust Filter in each hand. 2.
PAGE 30
SP6777-1 ProGuard ESF 4/18/11 10:30 AM PUSH DOWN Fine Dust Filter PULL UP Rubber Gasket at Bottom of Filter (cutaway view) P R O G U A R D 15 & 20 Figure A Page 30 ProGuard 15 & 20 Operation ProGuard 15 & 20 Utilización ProGuard 15 & 20 Fonctionnement VACUUMING DRY MATERIAL 1. A Fine Dust Filter (or optional HEPA media filter) must always be installed correctly to reduce the risk of leaks and possible damage to the Vacuum. RECOGIDA DE MATERIALES SECOS CON LA ASPIRADORA 1.
PAGE 31
SP6777-1 ProGuard ESF 4/18/11 10:30 AM Page 31 INTERCEPT MICRO FILTER BAG FINE DUST FILTER WET FILTER ProGuard 15 & 20 Operation ProGuard 15 & 20 Utilización ProGuard 15 & 20 Fonctionnement VACUUMING LIQUIDS NOTE: When picking up very small amounts of water, the Fine Dust Filter may be left in place. However, the Intercept Micro Filter bag MUST be removed. Even a very small amount of moisture can damage this bag and may cause it to break open.
PAGE 32
SP6777-1 ProGuard ESF 4/18/11 10:30 AM HANDLE REMOVED FOR CLARITY Page 32 ProGuard 15 & 20 Operation ProGuard 15 & 20 Utilización ProGuard 15 & 20 Fonctionnement EMPTYING THE TANK (Figure A) VACIADO DEL TANQUE (Figure A) VIDAGE DU RÉSERVOIR (Figure A) ! WARNING: To reduce the risk of injury from accidental starting, unplug power cord before emptying the tank.
PAGE 33
SP6777-1 ProGuard ESF 4/18/11 10:30 AM Page 33 ProGuard 15 & 20 Operation ProGuard 15 & 20 Utilización ProGuard 15 & 20 Fonctionnement USING THE POUR SPOUT (Figure A) UTILIZACIÓN DEL PICO VERTEDOR (Figura A) UTILISATION DU BEC VERSEUR (Figure A) 2. Position the tank/cart assembly in the desired location and remove the pour spout plug. 2. Posicione el ensamblaje de tanque / carrito en la ubicación deseada y retire el tapón del pico vertedor. 2.
PAGE 34
SP6777-1 ProGuard ESF 4/18/11 10:30 AM To Reorder Intercept Micro Filters: Go to www.pro-team.com or contact ProTeam’s Customer Service Department at 866.888.
PAGE 35
SP6777-1 ProGuard ESF 4/18/11 10:30 AM Page 35 ProGuard 15 & 20 Filter Maintenance NOTE: The Fine Dust Filter is made of high quality paper designed to stop very small particles of dust. The Fine Dust Filter can be used for small quantity wet pickup. Handle the filter carefully when removing to clean it or when installing it. Creases in the filter pleats may occur during installation but will not affect the performance of the filter.
PAGE 36
SP6777-1 ProGuard ESF 4/18/11 10:30 AM Page 36 15 & 20 Gallon Wet/Dry Vacuum Assembly 67 43 2 68 3 1 6 4 5 P R O G U A R D 7 9 69 8 10 12 70 71 16 11 72 14 15 13 15 & 20 16 73 17 74 18 19 39 41 40 24 38 21 26 37 41 36 75 20 76 27 41 42 42 25 35 32 31 77 29 34 28 49 48 33 30 47 46 47 22 23 45 44 52 50 64 65 54 66 51 60 55 53 57 59 58 56 61 62 63 78 Repair Parts Assembly All items sold as each's unless otherwise identified NO.
PAGE 37
SP6777-1 ProGuard ESF 4/18/11 10:56 AM Page 37 Ensamblaje de piezas de repuesto NO.
PAGE 38
SP6777-1 ProGuard ESF 4/18/11 10:30 AM (1) (2) Page 38 ProGuard 10 HEPA Carton Contents ProGuard 10 HEPA Contenido de la caja de cartón ProGuard 10 HEPA Contenu du carton OVERVIEW (Figure A) GENERALIDADES (Figura A) VUE D’ENSEMBLE (Figure A) • Extension Cord (2) • Cordón de extensión (2) • Cordon de rallonge (2) • Wet/Dry Vacuum Assembly (1) • Intercept Micro Filter Bag (3) • Certified HEPA Filter (4)* • Micro Cloth Pre-Filter (5)* • Dust Brush (6) • Crevice Tool (7) (3) (4)* • Hose Assemb
PAGE 39
SP6777-1 ProGuard ESF 4/18/11 10:30 AM Page 39 ProGuard 10 HEPA Assembly 1. Position the power head assembly on the tank assembly as shown. NOTE: Make sure the gasket on the power head and the sealing surface on the tank are not damaged and are clean and free of debris. 2. Hook the latches over the tabs on the ProGuard 10 HEPA Ensamblaje ProGuard 10 HEPA Assemblage 1. Posicione el cabezal del motor sobre el ensamblaje del tanque de la manera que se muestra en la ilustración. 1.
PAGE 40
SP6777-1 ProGuard ESF 4/18/11 Figure A 10:30 AM Page 40 ProGuard 10 HEPA Filter ProGuard 10 HEPA Removal & Installation Remoción e instalación del filtro ProGuard 10 HEPA Retrait et installation du filtre NOTE: Make sure the gasket on the HEPA filter and the sealing surface on the power head are not damaged and are clean and free of debris.
PAGE 41
SP6777-1 ProGuard ESF 4/18/11 10:30 AM Page 41 Figure A Filter Wing Nut ProGuard 10 HEPA Utilización ProGuard 10 HEPA Fonctionnement Intercept Micro Filter Installation (Figure A): The Intercept Micro Filter bag is to be used to collect dry material only. The correct positioning of the cardboard collar is required to assure proper seal. 1. Locate the two ribs on the inlet tube inside the tank. 2. Slide cardboard collar onto inlet tube and position cardboard collar between the two ribs. 3.
PAGE 42
SP6777-1 ProGuard ESF 4/18/11 10:30 AM Micro Cloth Pre-Filter Filter Band Clamp HEPA Filter Figure A Power Head MICRO CLOTH PRE-FILTER 10 H E P A ProGuard 10 HEPA Operation ProGuard 10 HEPA Utilización ProGuard 10 HEPA Fonctionnement 3. For best results, use the Intercept Micro Filter bag (107181) with the Certified HEPA Filter / Micro Cloth PreFilter assembly (107179) (Figure A). NOTE: A dry filter is necessary to pick up dry material.
PAGE 43
SP6777-1 ProGuard ESF 4/18/11 10:30 AM Page 43 ProGuard 10 HEPA Operation ProGuard 10 HEPA Utilización ProGuard 10 HEPA Fonctionnement EMPTYING THE TANK (Figure A) This Vacuum is equipped with a drain for easily emptying the contents into a floor drain. VACIADO DEL TANQUE (Figure A) VIDAGE DU RÉSERVOIR (Figure A) 1. Position the Vacuum close to where it needs to be drained. Figure A 2. Unscrew the drain cap from the drain on the back of the tank and allow the liquid to drain out. 3.
PAGE 44
SP6777-1 ProGuard ESF 4/18/11 10:30 AM INTERCEPT MICRO FILTER BAG CERTIFIED HEPA FILTER MICRO CLOTH PRE-FILTER Figure A To Reorder Intercept Micro Filters: Go to www.pro-team.com or contact ProTeam’s Customer Service Department at 866.888.
PAGE 45
SP6777-1 ProGuard ESF 4/18/11 10:30 AM Page 45 10 Gallon HEPA Wet/Dry Vacuum Assembly 2 3 39 6 1 4 5 7 40 9 11 12 10 41 42 16 8 43 14 15 16 13 44 45 18 17 46 19 47 20 21 22 48 24 25 49 26 23 33 27 32 31 29 36 28 35 30 34 37 38 Repair Parts Assembly - HEPA All items sold as each's unless otherwise identified NO.
PAGE 46
SP6777-1 ProGuard ESF 4/18/11 10:30 AM Page 46 Ensamblaje de piezas de repuesto P R O G U A R D 10 H E P A NO.
PAGE 47
SP6777-1 ProGuard ESF 4/18/11 10:30 AM Page 47 List of Sales Representatives / Lista de representantes de ventas / Liste des représentants autorisés jesse@nexus-now.com mcconnellspadafora@cogeco.net American Trading Co. Mexico 2911 Dixwell Ave., Suite 305 A Hamden, CT, 06518 (203) 909-6929 FAX (203) 909-6931 mgonzalez@ameritradingco.
PAGE 48
SP6777-1 ProGuard ESF 4/18/11 10:30 AM Page 48 how to reach us mail: P.O. Box 7385 Boise, ID 83707 USA phone: 866.888.2168 800.541.1456 208.377.9555 fax: 800.844.4995 208.377.3014 web: www.pro-team.com email: customerservice.proteam@emerson.