Specifications
1. DO NOT standor climb on miter saw stand, it couldtip over
causing serious injury.
2. BE SURE all locking pins are in the set-up position holes BEFORE
using your miter saw and miter Saw stand.
3. ALWAYS firmly attach miter saw. DO NOT attempt to use your miter
saw stadd until the miter saw is fastened firmly to the boards.
4, ONLY use your miter saw stand on a hard, dry, flat, and level surface.
5. BE SURE that any bench top tool used with this stand is firmly
attached to the boards.
6. BE SURE the board clamps are tightly clamped to the stand when the
bench top tool is in use.
7. ALWAYS keep all guards in place. BE SURE all power tool guards
are in good working order and are in proper adjustment
8. ALWAYS keep your hands away from the cutting area.
9. DO NOT mount a table saw onto this stand. The direction of feed on a
table saw iScounter to the axis of best stability on this stand.
Aggressive feeding Of sheet materials into a table saw could cause the
stand to tip.
10. ALWAYS use clamps or a vise to hold work when practical. Using
clamps or a vise to hold work is safer than using your hand. Italso
frees both hands to operate the saw.
BE SURE to read and understand all instructions in
this manual and the miter saw's operating manual before using it on the
stand. Failure to follow all instructions can result in electric shock, fire
and/or serious persona! injury.
WORK AREA SAFETY
1. ALWAYS keep your work area clean and well lit. Cluttered benches
and dark areas invite acciderits.
2. DO NOT operate power tools in explosive atmospheres, such as in
the presence of flammable liquids, gases, or dust. Power tools
create sparks that may ignite the dust or _umes.
3. ALWAYS keep bystanders, children, and visitors away while
operating a power tool. Distractions can cause you to lose control.
3