Specifications

STORAGE INSTRUCTIONS
(Figure 44)
Before moving or storing your miter saw stand:
Remove power tool and mounting boards from stand.
Move wheel assemblie s to upper positions on frame.
Tighten down mounting board clamps to top of stand.
Loosen edge guides and rotate them into a lowered position.
Lower supports and retract telescoping extensions
Fold up legs by disengaging release levers and rotating legs to folded
position.
Unlock center tabletop hinge and rotate stand into collapsed position.
Latch tabletop sides together with snap lock.
Stand may be rolled easily for transport and storage. See Figure 44,
Fig. 44
33