Specifications

CD-312

PRO WELD

9.2 Reverse Polarity (Recommended for brass or galvanized) (see Figure 3)

A. Connect ground cable connector (1A) into camlok (

4). The camlok should be connected into the

receptacle marked GUN. Twist until it locks. Attach “C” clamp (2) to the workpiece (

5) (CLEANED

AREA).

B. Connect the gun control cable (3A) into the female receptacle (3).

C. Connect the gun weld cable (4A) in

to the receptacle marked GROUND (1). Twist clockwise until

it locks.

D. Connect AC power cable to AC outlet.

NOTE:

The gun wel

ding and control cables must be laid out in a straight line. Poor weld quality may result if

welding cables are coiled.

Figure 3 Reverse Polarity Hook

PAGE 5