Specifications

CD-312
PRO WELD
TABLE OF CONTENTS
1.0 INTRODUCTION 1
2.0 WARRANTY 1
3.0 UNPACKING YOUR UNIT 1
4.0 SUGGESTED SAFETY PRECAUTIONS 1
5.0 GENERA L DESCRIPTION 2
6.0 THE CD WELDING PROCESS 2
7.0 POWER REQUIREMENTS 3
8.0 SYSTEM SPECIFICATIONS 3
9.0 WELDING SYSTEM HOOK - UP 4
9.1 Straight Polarity 4
9.2 Reverse Polarity 5
9.3 Cuphead Pin 6
10.0 SYSTEM OPERATION 7
11.0 GUN SET - UP 9
11.1 Standa rd 9
11.2 Installing or Changing Collets or Chucks 10
11.3 For Weld Pins with Collet Protector 10
11.4 Template Adapter 11
1 1.5 Collet Protector with Blunt Leg 11
11.6 Parts List LD CD Handgun 14
12.0 WELDABLE MATERIAL COMBINATIONS 15
13.0 CAUSES OF POOR OR ERRATIC WELDS 16
14.0 TROUBLE SHOOTING POOR WELDS 16
15.0 ROUTINE WELDER MAINTENANCE 17
16.0 ASSEMBLY – CD - 312 CONTROLLER 18,19,20
16.1 PC Board Assembly Drawing 21
17.0 TROUBLE SHOOTING – ELECTRICAL 22
18.0 CHECK LIST CD - 312 SYSTEM P.N. 100 - 0108 24
19.0 CHECK LIST CD - 312 SYSTEM P.N. 100 - 0109 24