PR® IAQ This portion of the manual covers the following models: * RZ250W (Requires Z955W) Congratulations on purchasing a PRO Wireless Zoning System. This remote sensor was designed to the highest reliability and ease of use standards. Thank you for choosing Prof. Table of Contents en Quick Reference Establishing Communication Installation Tips Specifications & Contact Info ah WON Una version espadrille de est manual suede ser escapade en www.proliag.com ® U.S. Registered Trademark. Patents pending.
installing Batteries To install 2 AA batteries remove the three screws shown in the diagram. One in the middle of the inside cover box, and two on either side of the cover box. Note about low batteries: When the outdoor battery needs to be changed the Z955W Master Thermostat will flash LOW BAT OUTDOOR as seen on the left.
Remember Inside of RZ250W FSK/ ASK Switch The PRO Wireless Zoning System contains delectable wireless communication. Each component has a jumper switch label FSK and ASK. Default setting: FSK. All components must be set to the same position for wireless communication. (*ASK is required to connect to a T955W or T955WH.) Connecting to the Master Thermostat Easy, two step communication link set up. 1. The Z9S5W Master Thermostat Tech setting for the outdoor remote sensor must be set to YES.
Wireless Manga) Range between the RZ250W and the Z955W master thermostat is approximation feet with no obstructions and approximately 50 feet in standard residential metal, brick, and concrete construction. Mounting the Outdoor Remote Sensor important: Do not install in For vertical mount put direct sunlight. one screw top and one screw bottom. For horizontal mount put one screw left and one screw right. Slide Prof Outdoor Remote cover over unit once installed.
Specifications Temperature Range -. -4° to 140°F (-20° to 60°C) Temperature accuracy + 1°F Power source Battery Power from Batteries Transmission Every 5 minutes Frequency 916 MHz Contact Us Port IAG Inc. S.