Operation Manual Operation Manual
T955 Pro1 Technologies P.O. Box 3377 Springfield, MO 65808-3377 Toll Free: 888-776-1427 Web: www.pro1iaq.com Hours of Operation: M-F 9AM - 6PM Eastern Table of Contents Table of Contents Thermostat Operation Thermostat Quick Reference Programming Features Warranty Information Page 1 2-3 4-7 8-14 15-16 17 Una version en español de este manual se puede descargar en la pagina web de la compañia. U.S. Registered Trademark. Patents pending Copyright 2018 All Rights Reserved. Rev.
Thermostat Operation Thermostat Operation LCD Display See page 6 for details about this display read out. 2 1 Glow in the dark light button The glow in the dark light button will self illuminate for several hours after exposure to ambient light. This button turns on the display light when pressed. 3 Fan Button Select ON or AUTO. The ON key will run the fan continuously. The AUTO key will cycle the fan on only when the heating or cooling system is on.
Thermostat Quick Reference Thermostat Quick Reference Battery Information Important: Insert 2 AA Alkaline batteries (included). High quality alkaline batteries are recommended. Caution: When the battery icon appears replace your AA batteries immediately. Failure to do so may result in your heating & cooling system becoming inoperable. Freezing or overheating can occur. The low battery indicator is displayed when the AA battery power is low.
Thermostat Quick Reference 2 Mon Tue Wed Thu FriAMSat Sun PM 1 8 Thermostat Quick Reference WAKE LEAVE RETURN SLEEP Set At HOLD HEAT ON COOL ON STAGE 1234 Clean Display Technician Setup 3 7 SYSTEM Heat Cool Auto Em. Heat 1 Indicates the current room temperature 2 Time and day of the week 3 Low Battery Indicator: Replace batteries when this indicator is shown. Program Menu Options: Show different options during programming.
Programming Set Time Programming Set Program Schedule For Four Time Periods Follow the steps below to set the day of the week and current time: 1. Press the Menu button. 2. Press Set time. 3. Day of the week is flashing. Use the or key to select the current day of the week. 4. Press Next. 5. The current hour is flashing. Use the or key to select the current hour. When using 12-hour time, make sure the correct a.m. or p.m. choice is selected. 6. Press Next. 7. Minutes are now flashing.
Programming Programming Saturday: Repeat steps 4 through 7 for the Saturday WAKE/OCC1 time period, LEAVE/UNOCC1 time period, RETURN/OCC2 time period, and for the Saturday SLEEP/UNOCC2 time period. To customize your 7 day Program schedule, follow these steps: Sunday: Repeat steps 4 through 7 for the Sunday WAKE/OCC1 time period, LEAVE/UNOCC1 time period, RETURN/OCC2 time period, and for the Sunday SLEEP/UNOCC2 time period. 2. Press the Menu button (If menu does not appear first, press Run Schedule).
Programming Programming Set Program Schedule For Two Time Periods (OCCUPIED, UNOCCUPIED) To customize your 5+1+1 Program schedule, follow these steps: Weekday: 1. Select HEAT or COOL with the SYSTEM key. Note: You have to program heat and cool each separately. 2. Press the Menu button (If menu does not appear first, press Run Schedule). 3. Press Set Schedule. Note: Monday-Friday is displayed and the OCCUPIED text is shown. You are now programming the OCCUPIED time period for the weekday setting. 4.
Programming 5. Then use the or key to make your setpoint selection for that day’s OCCUPIED period. 6. Press Next. 7. Repeat steps 4 through 6 for that day’s UNOCCUPIED time period. Repeat steps 4 through 6 for the remaining days of the week. Features Temporary & Permanent Hold Feature Temporary Hold: The thermostat will display HOLD and Run Schedule on the bottom of the screen when you press the or key. If you do nothing, the temperature will remain at this setpoint temporarily for 4 hours.
Features Warranty Information Filter Change & Other Reminders If your HVAC contractor has configured the thermostat to remind you when the air filter needs changed, you will see a reminder in the display when your air filter needs to be changed. Resetting the filter change reminder: When the reminder is displayed, you should change your air filter and reset the reminder by holding down the “Clean” key on the left side of the thermostat for 3 seconds.
Cut Out For Warranty Registration www.pro1iaq.
