Operation Manual Operation Manual
T705 Pro1 Technologies P.O. Box 3377 Springfield, MO 65808-3377 Toll Free: 888-776-1427 Web: www.pro1iaq.com Hours of Operation: M-F 9AM - 6PM Eastern Table of Contents Table of Contents Thermostat Quick Reference Thermostat Operation Warranty Information Page 1 2-4 5-6 7 Caution: Equipment damage hazard. Do not operate the cooling system if the outdoor temperature is below 50 ˚F (10 ˚C) to prevent possible compressor damage.
Thermostat Operation Thermostat Operation LCD Display See page 4 for details about this display read out. Glow in the dark light button The glow in the dark light button will self illuminate for several hours after exposure to ambient light. This button turns on the display light when pressed. ON AUTO COOL OFF HEAT LCD Display System Switch Glow in the dark light button Temperature Setpoint Buttons Fan Switch User Buttons Fan Switch Select ON or AUTO. ON will run the fan continuously.
Thermostat Quick Reference Thermostat Quick Reference Displays the user selected setpoint temperature. Days of the week and time. Sun Mon Tue Wed Thu Fri Sat AM Set At PM Temperature Set Time Run Sched O Hold Tech Set Next Step 88:88 LOW Set Sched Hold Prev Step Menu Done LEAVE C F SLEEP WAKE COOL ON HEAT ON Button Options Programmable Time Periods: Indicates the current This thermostat has 4 room temperature. programmable time periods per day.
Thermostat Quick Reference Thermostat Quick Reference Temporary and Permanent Hold Feature (if using programming) Filter Change Reminder Temporary Hold: The thermostat will display HOLD and RUN SCHED on the left of your screen when you press the or key. If you do nothing, the temperature will remain at this setpoint temporarily until next time period. Your program setpoint will then replace your temporary setpoint.
Programming The Thermostat Programming The Thermostat Set Time Set Program Schedule 5+1+1 or 7 Day To customize your program schedule, follow these steps: 1. With system switch set to OFF, press the MENU button 2. Press SET TIME 3. Day of the week will be flashing. Use the to select the current day of the week. 4. Press NEXT STEP or key 2. Press the MENU button (If menu does not appear first press RUN SCHED) 5. The current hour is flashing. Use the or key to select the current hour.
Programming The Thermostat Set Program Schedule 5+1+1 or 7 Day (Continue...) Saturday: Repeat steps 4 through 7 for the Saturday WAKE time period, LEAVE time period, RETURN time period, and for the Saturday SLEEP time period. Sunday: Repeat steps 4 through 7 for the Sunday WAKE time period, LEAVE time period, RETURN time period, and for the Sunday SLEEP time period. If using 7-Day Programming use previous steps for every individual day.
Cut Out For Warranty Registration www.pro1iaq.
