Operation Manual Operation Manual
T725 Pro1 Technologies P.O. Box 3377 Springfield, MO 65808-3377 Toll Free: 888-776-1427 Web: www.pro1iaq.com Hours of Operation: M-F 9AM - 6PM Eastern Table of Contents Table of Contents Thermostat Operation Thermostat Quick Reference Programming Warranty Information Page 1 2-3 4-7 8-10 11 Caution: Equipment damage hazard. Do not operate the cooling system if the outdoor temperature is below 50 ˚F (10 ˚C) to prevent possible compressor damage.
Thermostat Operation Thermostat Operation LCD Display See page 4 for details about this display read out. Glow in the dark light button The glow in the dark light button will self illuminate for several hours after exposure to ambient light. This button turns on the display light when pressed. FAN ON AUTO OFF COOL HEAT EmH Fan Switch Select ON or AUTO. ON will run the fan continuously. AUTO will cycle the fan on only when the heating or cooling system is on.
Thermostat Quick Reference Thermostat Quick Reference 2 Important: 8 2 o 1 7 3 LOW Em 1 Indicates the current room temperature 2 Time and day of the week 3 Low Battery Indicator: Replace batteries when this indicator is shown. Button Options Program Time Periods: This thermostat has 4 programmable time periods per day. System Operation Indicators: The COOL ON, HEAT ON or icon will display when the COOL, HEAT, or (fan) is on. Note: The Compressor delay feature is active if these are flashing.
Thermostat Quick Reference Thermostat Quick Reference Temporary and Permanent Hold Feature Filter Change Reminder Temporary Hold: The thermostat will display HOLD and RUN SCHED on the left of your screen when you press the or key. If you do nothing, the temperature will remain at this setpoint temporarily until next time period. Your program setpoint will then replace your temporary setpoint.
Programming The Thermostat Programming The Thermostat Set Time Set Program Schedule 5+1+1 or 7 Day To customize your program schedule, follow these steps: 1. With system switch set to OFF, press the MENU button 2. Press SET TIME 3. Day of the week will be flashing. Use the to select the current day of the week. 4. Press NEXT STEP or key 5. The current hour is flashing. Use the or key to select the current hour. When using 12-hour time, make sure the correct a.m. or p.m. choice is selected. 6.
Programming The Thermostat Set Program Schedule 5+1+1 or 7 Day (Continue...) Saturday: Repeat steps 4 through 7 for the Saturday WAKE time period, LEAVE time period, RETURN time period, and for the Saturday SLEEP time period. Sunday: Repeat steps 4 through 7 for the Sunday WAKE time period, LEAVE time period, RETURN time period, and for the Sunday SLEEP time period. If using 7-Day Programming use previous steps for every individual day. You can also use these time saving functions.
Cut Out For Warranty Registration www.pro1iaq.
