Operation Manual Operation Manual
T755 Pro1 Technologies P.O. Box 3377 Springfield, MO 65808-3377 Toll Free: 888-776-1427 Web: www.pro1iaq.com Hours of Operation: M-F 9AM - 6PM Eastern Table of Contents Table of Contents Thermostat Operation Thermostat Quick Reference Programming Features Warranty Information Page 1 2-3 4-7 8-10 11 12 Una version en español de este manual se puede descargar en la pagina web de la compañia. U.S. Registered Trademark. Patents pending Copyright 2017 All Rights Reserved. Rev.
Thermostat Operation Thermostat Operation LCD Display See page 6 for details about this display read out. Glow in the dark light button The glow in the dark light button will self illuminate for several hours after exposure to ambient light. This button turns on the display light when pressed. FAN SYSTEM Fan Button Select ON, or AUTO. The ON setting will run the fan continuously. The AUTO setting will cycle the fan on only when the heating or cooling system is on.
Thermostat Quick Reference Thermostat Quick Reference Battery Door Information Insert 2 AA Alkaline batteries (included). High quality alkaline batteries are recommended. Simple operating instructions are found on the back of the battery door. Important: The low battery indicator is displayed when the AA battery power is low. If the user fails to replace the battery within 21 days, the screen will only show the low battery indicator but maintain all functionality.
Thermostat Quick Reference Thermostat Quick Reference Indicates the current room temperature 8 Time and day of the week 3 Low Battery Indicator: Replace batteries when this indicator is shown. Menu Options: Shows different options. 7 Program Time Periods: This thermostat has 4 programmable time periods per day. o System Operation Indicators: The COOL ON , HEAT ON or icon will display when the COOL, HEAT, or (fan) is on. The compressor delay feature is active if these are flashing.
Programming Set Time (If using programming) Follow the steps below to set the day of the week and current time: 1. Press the MENU button. 2. Press SET TIME. 3. Day of the week will be flashing. Use the or key to select the current day of the week. 4. Press NEXT. 5. The current hour is flashing. Use the or key to select the current hour. When using 12-hour time, make sure the correct a.m. or p.m. choice is selected. 6. Press NEXT. 7. Minutes are now flashing. Use the or key to select current minutes. 8.
Programming & Features Set Program Schedule 5+1+1 or 7 Day Warranty Information (continued) Saturday: Repeat steps 4 through 7 for the Saturday WAKE time period, LEAVE time period, RETURN time period, and for the Saturday SLEEP time period. Sunday: Repeat steps 4 through 7 for the Sunday WAKE time period, LEAVE time period, RETURN time period, and for the Sunday SLEEP time period. If using 7-Day Programming: Use these same steps for every individual day.
Cut Out For Warranty Registration www.pro1iaq.
