Operation Manual Operation Manual
T855i Pro1 Technologies P.O. Box 3377 Springfield, MO 65808-3377 Toll Free: 888-776-1427 Web: www.pro1iaq.com Hours of Operation: M-F 9AM - 6PM Eastern Table of Contents Table of Contents Thermostat Operation Thermostat Quick Reference Programming Features Warranty Information Page 1 2-3 4-7 8-10 11-13 13 Una version en español de este manual se puede descargar en la pagina web de la compañia. U.S. Registered Trademark. Patents pending Copyright 2018 All Rights Reserved. Rev.
Thermostat Operation Thermostat Operation LCD Display See page 6 for details about this display read out. Glow in the dark light button The glow in the dark light button will self illuminate for several hours after exposure to ambient light. This button turns on the display light when pressed. Fan Button Select ON, AUTO or IAQ. The ON setting will run the fan continuously. The AUTO setting will cycle the fan on only when the heating or cooling system is on. IAQ will enable IAQ FAN MODE, if programmed.
Thermostat Quick Reference Thermostat Quick Reference Indicates the current room temperature Time and day of the week WIFI Signal Strength Button Options Program Time Periods - Residential: Uses 4 time periods - WAKE, RETURN, LEAVE & SLEEP. Commercial uses 2 time periods - OCCUPIED, UNOCCUPIED. Staging Indicators: Indicates stages of heat or cool running. The compressor delay feature is active if these are flashing.
Thermostat Quick Reference Thermostat Quick Reference Set Time Set Program Schedule For Four Time Periods Follow the steps below to set the day of the week and current time: (WAKE, LEAVE, RETURN, SLEEP) 1. Press the MENU button. 2. Press TIME. 3. Day of the week will be flashing. Use the or key to select the current day of the week. 4. Press STEP. 5. The current hour is flashing. Use the or key to select the current hour. When using 12-hour time, make sure the correct a.m. or p.m. choice is selected.
Programming Saturday: Repeat steps 4 through 7 for the Saturday WAKE time period, for the Saturday LEAVE time period, for the Saturday RETURN time period, and for the Saturday SLEEP time period. Sunday: Repeat steps 4 through 7 for the Sunday WAKE time period, for the Sunday LEAVE time period, for the Sunday RETURN time period, and for the Sunday SLEEP time period.
Programming Saturday: Repeat steps 4 through 7 for the Saturday OCCUPIED time period and for the Saturday UNOCCUPIED time period. Sunday: Repeat steps 4 through 7 for the Sunday OCCUPIED time period and for the Sunday UNOCCUPIED time period. To customize your 7 day Program schedule, repeat steps 4 through 8 for the Tuesday, Wednesday, Thursday, Friday, Saturday and Sunday.
Features Warranty Information Filter Change & Other Reminders If your HVAC contractor has configured the thermostat to remind you when the air filter needs changed, you will see a reminder in the display when your air filter needs to be changed. Resetting The Filter Change Reminder: When the reminder is displayed, you should change your air filter and reset the reminder by holding down the Set Time/Next Step button of the thermostat for 3 seconds.
Cut Out For Warranty Registration www.pro1iaq.
