PROAVIO TM Drive your creativity Studiorack S4UF Quick start guide FW800 Storage Array with Multi-interface Connectivity www.proavio.com/studiorack S4UF-UG v.1.
S4UF Quick start guide 1 Welcome 2 What is in the box? 4 Thank you for choosing Proavio Thank you for buying Studiorack S4UF, the first professional FireWire800storage solution designed for high resolution digital media production, and general high performance storage requirements. Disk Installation If your S4UF was purchased with capacity, please skip this section and immediately go to section 5.
S4UF 6 Quick start guide HBA/RAID Controller Installation Your S4UF features a RAID-ready JBOD architecture. This provides the best support for a wide range of host bus adapters & PCI RAID controllers. Always follow your HBA’s controller’s installation procedure to ensure proper operation. 8 Connecting to Your Computer - Cont’d Your S4UF can be connected to a Mac or Windows-based workstations through a choice of small computer interface connections such as FW400, FW800, and High-speed USB2.0. Figure 4.
S4UF 10 Quick start guide Connecting Your S4UF - Host Workstation After connecting the cable to your S4UF, connect the opposite end of the cable to an open port FireWire800. Firmly push the cable into the available FW800 port. Always double check for proper cable insertion. 13 Troubleshooting This section covers some common support questions. If you are experiencing an urgent issue, please contact your dealer or visit us online at www.proavio.
PROAVIO © 2007 Proavio, U.S.A. All rights reserved. TM Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Proavio, U.S.A. Every effort has been made to ensure that the information in this manual is accurate. Proavio is not responsible for printing or clerical errors. Proavio, U.S.A. 12221 Florence Ave. Santa Fe Springs, CA 90670 (562) 777-3488 www.proavio.