Installation Guide

ManualsBrandsPROBRITE ManualsLighting50-Watt Dark Bronze Outdoor Integrated LED Wall Pack Light

Before returning to the store, call or email PROBRITE

Customer Service 9am-5pm EST Monday to Friday.

1-844-507-5651

support@PROBRITE.com

PROBRITE.COM

Questions? / Missing Parts? / Need Accessories?

Visit us online anytime or call us to get information on our product range, download

detailed spec & photometric ﬁles, ﬁnd product and mounting accessories, view

installation tutorials and videos, and learn about our DLC® rebate eligible products.

INSTALLATION,

USAGE, & CARE GUIDE

POWERWALL LED

WALLPACK

Model No.

Mfr. SKU

PWRW50-PC-4K-BZ

103-01100004-1

Summary of content (7 pages)

PAGE 1
Model No. Mfr. SKU PWRW50-PC-4K-BZ 103-01100004-1 POWERWALL LED WALLPACK INSTALLATION, USAGE, & CARE GUIDE Questions? / Missing Parts? / Need Accessories? Before returning to the store, call or email PROBRITE Customer Service 9am-5pm EST Monday to Friday. 1-844-507-5651 support@PROBRITE.com PROBRITE.
PAGE 2
Table of Contents Pre-Installation Table of Contents......................... 2 Safety Information....................... 2 Pre-Installation..............................3 Planning Installation......................3 Specifications.................................. 3 Tools Required.................................3 Hardware Included.........................4 Package Contents......................... 4 Installation.................................... 5 Operation......................................
PAGE 3
Pre-Installation (continued) Installation HARDWARE KIT 1 NOTE: Hardware not shown to actual size. ☐☐ The fixture can be mounted in the following two ways: ☐☐ Junction Box Mount: Use a junction box to mount the fixture. CC BB AA For best results ☐☐ Surface Conduit Mount: The fixture can also be mounted directly on the wall surface using conduit entry.
PAGE 4
Installation (continued) Installation (continued) 3 5 Remove the mounting base plate D NOTE: The mounting plate tightening screws (C) comes pre-installed on the light fixture. ☐☐ Loosen the two mounting base tightening screws (C) using a philips screwdriver to open the fixture. (Fig. 1) ☐☐ The fixture will side open and stay connected on the hinge.( Fig. 2) Junction Box ☐☐ Route the junction box wires through the large center hole in the mounting base (D).
PAGE 5
Installation (continued) Installation (continued) Surface Conduit Mount ☐☐ Remove desired conduit plug from one of the fixture's sides from the where conduit will enter. (Fig. 2) ☐☐ Make wiring connections inside the fixture as per the instructions given below. ☐☐ D Conduit BB If necessary, strip 3/8" of insulation from junction box or fixture (A) wires (fig 1).
PAGE 6
Operation (continued) Troubleshooting (continued) SWITCH Problem Possible Cause OPTION 2: SWITCH CONTROLLED Switch controlled operation enables the light fixture to turn ON and OFF by flipping a switch that controls the electricity to the outlet powering the fixture. The light fixture will not turn ON and OFF automatically, but is manually controlled. CONTROLLED E Light sensor is in a shaded area To enable switch activated operation leave the black cap cover on the photocell.
PAGE 7
Questions? / Missing Parts? / Need Accessories? Before returning to the store, call or email PROBRITE Customer Service 9am-5pm EST Monday to Friday. 1-844-507-5651 support@PROBRITE.com PROBRITE.COM RETAIN THIS MANUAL FOR FUTURE USE Para las translaciones en español, visit www.probrite.