User guide

821116: AMP2-16V Series User Guide

Chapter 5 Menu List

Dolby Decoder Configuration Menu

representation to the actual program as possible. The

characteristics of line compression are:

· Boost compression scaling for low-level signals is

performed.

· Cut compression scaling for high-level signals is

performed.

The term line is derived from the use of this profile with line

outputs of set-top decoders and other A/V equipment.

• Dialnorm Only: This selection sets the Dolby decoder to

operate in exactly the same way as in the

None setting, except

that on Dolby E bitstreams, the Dialnorm is adjusted to

reproduce at the level indicated by the Dialnorm metadata

value.

• Line Mode: This selection sets the Dolby decoder to operate

in the same way as the Dialnorm Only setting above, except

that the Line profile is applied to the main outputs as well as

to the AUX output.

• RF Mode: This selection sets the Dolby decoder to operate

with an RF compression profile. This mode provides the most

aggressive amount of compression resulting in the least

dynamic range in the output signal. The term RF is derived

from the use of this profile as a suitable one for use with the

RF output of set top decoders, which have a limited audio

dynamic range.

• Metadata Scroll: Rotating this knob scrolls the list of available

Dolby metadata up or down, actively updating the metadata list.

The arrows at the right of the list indicate whether you can scroll to

view more data above or below.

The metadata from the selected Dolby program is shown in the

window at the center of the screen. This metadata is updated live.

the

Metadata Scroll control allows you to simply scroll up and

down the list.