User guide

821116: AMP2-16V Series User Guide
© 2011 Wohler Technologies, Inc. All rights reserved.
28
Chapter 3 The “How Do I...” Chapter
Frequently Asked Questions
Frequently Asked Questions
How Do I Select the Inputs I Want to Hear in the
Speakers?
This selection appears on the Monitor Mixer Configuration Menu.
Figure 3–2 Monitor Mixer Configuration Menu
1. Rotate the Mixer Channel Select knob to select the channel pair
to manipulate.
2. Rotate the Source Pair Select control to select the audio
processor card slot and desired input pair on that card.
3. Now is also a good time to rotate the Channel Function control to
designate the function of each channel in that pair.
Configuration Selection
Menu
Main Screen
Menu
Configure
Monitor Mixer
Monitor Mixer
Configuration Menu
Monitor Mixer Configuration Menu
Save / ExitHelp Cancel
Chan 1 Chan 2 Chan 3 Chan 4
Slot 2 SDI-3G In
Pair 4
Slot 2 SDI-3G In
Pair 5
+0 +0 +0+0
Channel
Trim
Source
Pair
Select
Phase
LED
On/Off
Delay to Speakers = 170 mS
Audio
Delay
Dolby 5.1
Speaker
Mute:
Off
L Front R Front Center LFE
Channel
Func
Mixer
Channel
Select
Set
Clusters