User guide

821116: AMP2-16V Series User Guide
© 2011 Wohler Technologies, Inc. All rights reserved.
45
Chapter 3 The “How Do I...” Chapter
Frequently Asked Questions
1. Turn the Save Current Config control to select the number (1 to
32) of the preset you would like to save the current configuration
into. Then press the control.
2. The preset naming screen will automatically appear to allow you
to name the preset. Enter a name that is descriptive and that you
will recognize later. If you have named this preset before and want
to keep the same name, simply press Save/Exit.
3. Whenever you make menu changes and then exit to the Main
Screen
without saving into a preset, a yellow warning flag will
appear in the header of the main screen to remind you to save the
changes you make.
How Do I Quickly Recall Presets from the Main
Screen?
While presets can always be recalled from the Recall Preset control
on the Configuration Selection Menu, pressing Recall Preset hot
keys on the Main Screen is an even more direct and quick way to
do it.
This is set up in one of the Hot Key Configuration Menus.
Configuration Selection
Menu
Main Screen
Menu
Configure Main
Screen Main Screen
Configuration Menu
Hot Key 1-8
Configuration Menu
or
Hot Key 9-16
Configuration Menu
Configure
Hot Keys