Specifications

PR O C E E D

p r e by MADRIGAL AUDIO LABORATORIES

cd2 tuner tape1

main out

remote

tape2/

ssp

cd1 bal/aux

RRLL

rec1 rec2/ssp

main out

i n p u t s

o u t p u t s

remote

turn-on

~ ac mains

mains fuse:

.5A (250V) slo-blo 5x20mm

please see bottom panel for voltage and other information

Rear Panel

Caution! Disconnect all associated equipment from the AC mains

BEFORE making any signal connections and applying power

to the PRE.

1 SINGLE-ENDED AUDIO INPUTS

Accepts right-channel and left-channel audio signals from source equip-

ment with single-ended (RCA) outputs. Traditional single-ended audio

inputs are provided for a total of three components, designated: cd2,

tuner,

and tape1.

Connect the right-channel and left-channel single-ended outputs of your

various source components to the corresponding inputs on the PRE.

2 TAPE2/SSP INPUT

This single-ended audio input may be used either as a conventional in-

put for a second tape deck or as a dedicated surround sound processor

loop. In the latter case, the front left and right outputs of your surround

sound processor would be routed to the tape2/ssp input and passed

through the PRE at unity gain (that is, with no change in volume), re-

gardless of the volume control setting of the PRE.

The ssp function gives the outboard surround sound processor control

over the volume of all the loudspeakers (including those normally con-

trolled by the PRE) when it needs that control. Returning the system to

two-channel stereo operation is then as simple as selecting a different

input. (See “Using Surround Sound Processors” for more information.)