Specifications

erasing memory buttons

To erase the Memory Buttons, follow these steps:

1 Select the mode (AUD or SAT) in which you want to erase the

Memory button.

2 Press the corresponding Device button (audio or sat) and

mute button simultaneously. SET will appear in the LCD. Press

the Memory button to be erased.

M(1-5)_## will appear in the

LCD.

3 Press the channel + button. SAVE will flash in the LCD. The

Memory button is now erased.

NOTE: Any previously stored commands on a Memory button will be erased

when new commands are stored on the same Memory button.

changing the lcd display Twenty-four different LCD displays can be selected for each Device mode of

the remote control. To select an alternate LCD display, please use the following

procedure:

1 Press-and-hold the Device button for which you would like to

change the LCD setting.

2 While pressing the Device button, press-and-release the

pause button. Each time the pause button is pressed, the

LCD will show one of twenty-four displays.

3 Release the Device button when you find the new LCD dis-

play you wish to assign to the Device mode.

• CHOICE OF LCD DISPLAYS

TV VCR CABLE SAT AUDIO CD

DVD AUX TV2 VCR2 TUNER AMP

TAPE1 TAPE2 WEBTV SURR DAT PROJE

AUX2 LD AUD2 LIGHT DSS AV

• LCD DISPLAYS IN THE AUTOMATIC AUDIO MODE

A-TV A-VCR A-CAB A-SAT AUDIO A-CD

A-DVD A-AUX A-TV2 S-VC2 A-TUN A-AMP

A-TA1 A-TA2 A-WEB A-SUR A-DAT A-PRJ

A-AX2 A-LD A-A2 A-LIT A-DSS A-AV