Operating instructions

MAINTENANCE
980157 12/04/03
4-1
SERVICE SCHEDULE
Engine Daily Check engine oil level. *** Fill to proper level
Vacuum Pump Daily
Spray WD-40 in lubrication cup at front of console for 5
sec.
Water Pump Daily Check oil level.** Fill to proper level
Solution Inlet Tube Strainer Daily Check strainer for blockage, remove any debris
Vacuum Inlet Filter (In Waste Tank) Daily Clean filter, inspect, replace if damaged
Vacuum Hoses Daily Wash out with clean water
Automatic Waste Pump Daily Inspect and remove any debris or sediment
Chemical Filter Daily Inspect daily
Vacuum Pump Weekly* Check oil level. Fill to proper level
Water Box Float Valve Weekly Check for proper seating and shut-off
Water Pump Inlet Filter Weekly* Check for debris and clean
Battery Weekly* Check for proper fluid level. Fill with distilled water only
Solution Outlet Y-Strainer Weekly* Inspect and remove any debris or blockage
High Pressure Hoses 25 hrs Inspect for damage or impending damage
Pressure Regulator 50 hrs Lubricate o-rings
Pressure Regulator 50 hrs Lubricate plug behind spring
Engine 100 hrs Change engine oil***
Engine 100 hrs Change oil filter***
Engine 100 hrs Check fan belt tightness
Battery 100 hrs* Clean battery terminals
Belts/Pulleys 100 hrs Check belt wear and tension. Check pulley alignment.
Automatic Waste Pumpout 100 hrs Clean inlet and outlet ports
Float Valve Seal 200 hrs. Replace seal
Engine 200 hrs Service air cleaner elements*
Fuel Pump 200 hrs Check hose connections
Engine 200 hrs Check spark plugs for carbon deposits and proper gap
Chemical Valves 200 hrs Inspect and/or adjust packing nuts
Heat Bypass Valve 200 hrs Inspect and/or adjust packing nuts