Operating instructions

OPERATION
980076 08/26/03
3-7
WASTE TANK
INLET
TUBE
OUTLET
TUBE
CONNECT
CONSOLE
ENGINE SHUTOFF
CORD-END TO
WASTE TANK
RELIEF VALVE
WASTE TANK
DRAIN VALVE
CONNECT VAC
INLET TUBE TO
WASTE TANK
INLET TUBE
VACUUM
INLET TUBE
CONNECT
WASTE
OUTLET
TUBE TO
HOSE AND
DRAIN VALVE
LEVEL SENSOR
SWITCH
SPECIAL INSTRUCTIONS:
1. Cut hoses to fit, if necessary. Make certain that
the waste outlet hose is long enough to reach
the outside of the vehicle before cutting. All
hoses are 2” I.D. internal vacuum hose.
2. When cutting hoses, make certain that the
cutting blade is facing away from you hands,
fingers, or any other part of your body to avoid
injury.
3. Do not install hoses with excessive bends or kinks.
4. Place clamps on hoses before installing.
5. Tighten all hose clamps firmly.