Owner manual

OPERATION - DIESEL
APEX 86037630
6-1
TECHNICAL SPECIFICATIONS – DIESEL ENGINES
ITEM DIMENSION/CAPACITY
Engine speed 2850 rpm (high speed) Water Pump ON
1300 rpm (idle speed) Water Pump OFF.
Water pump rpm 1000 rpm
Vacuum pump rpm 2600 rpm
Water flow rate 4.15 GPM (maximum)
Water pump pressure 1000 PSI (maximum)
Vacuum relief valve 13” Hg
Waste tank capacity 80 gallons
Console weight 910 lbs.
Console weight (with waste tank & waste tank
accessories)
1160 lbs.
(1830 lbs. If waste tank is full)
TORQUE VALUES
Engine front pulley 300 inch lbs 25 foot/lbs
Vacuum pump hub 300 inch/lbs 25 foot/lbs
Engine rear pulley 480 in//lbs 40 foot/lbs
JET SIZING:
Recommended floor tool tip sizing not exceed a total of “.06”. Using larger jet sizes on your cleaning unit may
reduce cleaning temperatures.
Example: Tri-jet wand uses three 9502 jets (95° spray angle w/ 02 orifice).
02 x 3 = 06
When using two floor tools while cleaning with this unit, it is recommended that each tool tip size does not exceed
a total of “.045”.
Example: Tri-jet wand uses three 95015 jets (95° spray angle w/ 015 orifice).
015 x 3 = 045……….045 x 2 tools = 09
Upholstery tool jet size: 80015
Stair tool jet size: 9502