Owner's manual

OPERATIONS
EVEREST 980086 05/05/04
3-1
TECHNICAL SPECIFICATIONS
ITEM DIMENSION/CAPACITY
Engine speed 2400 rpm (high speed) Water Pump ON
900 rpm (idle speed) Water Pump OFF.
Water pump rpm 1655 rpm
Vacuum pump rpm 2800 rpm
Water flow rate 4.5 GPM (maximum)
Water pump pressure (low pressure) 1000 PSI (maximum)
Water pump pressure (high pressure) 3000 PSI (maximum)
Vacuum relief valve 14” Hg
Waste tank capacity 80 or 100 gallons
Console weight 860 lbs.
Console weight (with waste tank & waste tank
accessories)
1110 lbs (1840 lbs. If waste tank is full)
TORQUE VALUES
Engine hub 480 inch lbs 40 foot/lbs
Vacuum pump hub 192 inch/lbs 16 foot/lbs
Water pump shaft bolt 300 in//lbs 25 foot/lbs
JET SIZING:
Recommended floor tool tip sizing not exceed a total of “.06”. Using larger jet sizes on your cleaning unit may
reduce cleaning temperatures.
Example: Tri-jet wand uses three 9502 jets (95° spray angle w/ 02 orifice).
02 x 3 = 06
When using two floor tools while cleaning with this unit, it is recommended that each tool tip size does not exceed
a total of “.045”.
Example: Tri-jet wand uses three 95015 jets (95° spray angle w/ 015 orifice).
015 x 3 = 045……….045 x 2 tools = 09
Upholstery tool jet size: 80015
Stair tool jet size: 9502