Full Product Manual

www.usaprocom.com
21200067-01A
Figure 25 - Adjusting Ambiant Light
Figure 24 - Ambiant Light
OPERATION
OPTIONAL HAND-HELD REMOTE OPERATION
Note: All remote control accessories must
be purchased separately. Follow instructions
included with the remote control.
NOTICE: You must light the pilot
before using the hand-held re-
mote control unit. See Lighting
Instructions, page 20.
After lighting, let pilot ame burn for about
one minute. Turn control knob to the ON posi-
tion. Adjust ame adjustment knob anywhere
between HI and LO. Slide the selector switch
to the REMOTE position.
Note: The burner may light if hand-held re-
mote was on when selector switch was last
turned off. You can now turn the burner on
and off with the hand-held remote control unit.
IMPORTANT: Do not leave the selector switch
in the REMOTE or ON position when the pilot
is not lit. This will drain the battery.
Remote Component
Please see other remote control instructions.
Ambiance Light Operation
Make sure 2 D size batteries are installed
in the battery case. Switching knob to the
ON position turns the background light on.
Switching knob to the OFF position turns the
background light off.
Angle Adjust for Background Light
Loosen 2 screws on the background light with a screwdriver. Adjust angle of the bracket to
get the best lighting effect.