Installation Guide

ManualsBrandsProCom ManualsAsh Buckets28 in. to 48 in. Adjustable Fireplace Hood in Black

Questions, problems, missing parts? Before returning to your retailer, call

our customer service department at 1-866-573-0674, 8:00 am - 4:45 pm EST,

Monday through Friday or email contact@usaprocom.com

BFH1

BLACK FIREPLACE HOOD

INSTALLATION INSTRUCTIONS

WARNING: Fireplace hood becomes very

hot during replace operation. Do not touch

replace hood. Severe burns could occur.

Summary of content (8 pages)

PAGE 1
BFH1 BLACK FIREPLACE HOOD INSTALLATION INSTRUCTIONS WARNING: Fireplace hood becomes very hot during fireplace operation. Do not touch fireplace hood. Severe burns could occur. Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-866-573-0674, 8:00 am - 4:45 pm EST, Monday through Friday or email contact@usaprocom.
PAGE 2
REPLACEMENT PARTS LIST B C D A E Part A B C D E Description Fireplace Hood Assembly Fireplace Hood (Left) Fireplace Hood (Middle) Fireplace Hood (Right) Mounting Bracket Part # Qty BFH1-03 BFH1-01 BFH1-02 BFH1-04 1 1 1 2 AA BB Part Hardware Contents AA Metal Screws BB Masonry Screws Qty 4 4 If any of these pieces are missing or damaged call ProCom Heating, Inc. at 1-866-573-0674 for referral information. PREPARATION Before beginning assembly of product, make sure all parts are present.
PAGE 3
ASSEMBLY INSTRUCTIONS SIZING THE FIREPLACE HOOD TO THE FIREPLACE OPENING OR GLASS DOOR FRAME The fireplace hood assembly is adjustable from 28" to 48". The hood assembly must be opened wide enough to cover the entire fireplace opening. The hood can be opened wider if desired. Fore best appearance, make sure center section of the hood assembly is centered with the fireplace opening. Follow the instructions below to properly size the fireplace hood assembly. 1.
PAGE 4
ASSEMBLY INSTRUCTIONS INSTALLING HOOD TO MASONRY FIREPLACE Follow the instructions below that best describes your fireplace. E Masonry With Glass Doors 1. Loosen clamps that hold glass door frame to fireplace. Slide the mounting brackets (E) behind the glass door frame (see Figure 5). Place mounting brackets near ends of horizontal glass door frame. Note: If frame is too tall, the bottom of the mounting bracket will not slide under the linter (top) of the fireplace.
PAGE 5
ASSEMBLY INSTRUCTIONS 3. Use the 4 masonry screws (BB) provided to fasten the brackets to the lintel (see Figure 9). 4. Slide fireplace hood assembly (A) over mounting brackets (E). See Figure 10. A Lintel E BB Figure 9 IMPORTANT: Tape must be removed before operating the fireplace. BB E Figure 10 INSTALLING HOOD TO MANUFACTURED FIREPLACE WARNING: Many manufactured fireplaces have louver openings for ventilation. Do not cover any louver openings with fireplace hood.
PAGE 6
ASSEMBLY INSTRUCTIONS Installing Into Manufactured Fireplace Opening 1. Discard the mounting brackets. 2. Place the fireplace hood assembly (A) inside fireplace opening (see Figure 12). 3. Hold the fireplace hood assembly (A) in place and drill 4 holes through the hood and into the channel on the fireplace opening (see Figure 13). Make sure holes are evenly spaced and cover most of the hood's length. 14.
PAGE 7
REPLACEMENT PARTS Note: Use only original replacement parts. This will protect your warranty coverage for parts replaced under warranty. PARTS UNDER WARRANTY Contact authorized dealers of this product. If they can’t supply original replacement parts, call Customer Service toll free at 1-866-573-0674 for referral information.
PAGE 8
WARRANTY KEEP THIS WARRANTY Model ________________________________ Serial No. _____________________________ Date Purchased ________________________ Keep receipt for warranty verification. REGISTER YOUR PRODUCT AT WWW.USAPROCOM.COM IMPORTANT: We urge you to register your product within 10 days of date of installation, complete with entire serial number which can be found on the rating plate. Please fill out the warranty information above for your personal records. Retain this manual for future reference.