Installation Guide

www.usaprocom.com
200498-01A6
ASSEMBLY INSTRUCTIONS
Installing Into Manufactured
Fireplace Opening
1. Discard the mounting brackets.
2. Place the replace hood assembly (A)
inside replace opening (see Figure 12).
3. Hold the replace hood assembly (A) in
place and drill 4 holes through the hood
and into the channel on the fireplace
opening (see Figure 13). Make sure holes
are evenly spaced and cover most of the
hood's length.
14. Use the 4 sheet metal screws provided to
fasten the replace hood assembly (A) to
the replace opening.
IMPORTANT: Tape must be removed before
operating the replace.
A
Manufactured
Fireplace
Fireplace
Opening
Figure 12
Figure 13
A
Manufactured Fireplace
Manufactured Fireplace
Fireplace
Opening
Fireplace
Opening
Fireplace
Hood
Fireplace
Cross
Section
Approximate Screw
Locations