Product specifications

29
Fig. 3
3. Drill two holes (5/16 in.) in the corner where the replace
is to be displayed. Drill the rst hole 34 5/16 in. from the
ground up; and the second hole 36 in. from the ground up
as shown in Fig. 3. Put the wall anchors (DD) in the
holes by pinching the anchor tabs together.
Hardware Used
Wall Anchors
x 2
4. Attach the triangular wood block to the holes drilled in
step 4 with ST5 screw - 2 3/8 in. (AA) as shown in
Fig. 4. This block is used to support the top triangle
panel.
Hardware Used
AA
ST5 Screw - 2 3/8 in.
x 2
DD
Push replace into corner so that the top triangle panel is
resting on top of the wood block.
Fig. 4
Mitered Corner
Joints
Baseboard
34 5/16 in.
36 in.
Mitered Corner
Joints