Owner manual

MH 1-XR
¼ λ Mobile Antenna for the 160 MHz Band
DESCRIPTION
Black-chromed, conical stainless steel whip.
Elegant transition between whip and mounting surface due to slim-line
mount.
30° tiltable whip. Stainless steel X-mount with M6-thread whip-fastening
system.
Simple mounting exclusively with access from the outside.
Models available with X-mount (oblong), and MM-mount (magnetic).
Choice between two connection principles:
X-mount, MM-mount: FME-connection (supplied without cable).
XP4-mount: Permanently attached 4 m cable terminated with FME-
connector.
All whips are compatible with all mounts.
ORDERING DESIGNATIONS
TYPE MOUNT VERSION PRODUCT NO.
MH 1-XR X-mount (oblong) with FME-system 130000708
MH 1-CXR CX-mount with FME-system (circular) 130000709
MH 1-XP4R XP4-mount with 4 m cable and
FME-connector (oblong)
130000710
MH 1-CXP4R CXP4-mount with 4 m cable and
FME-connector (circular)
130000711
MH 1-MMR MM-mount with FME-system (magnetic) 130000707
SPECIFICATIONS
ELECTRICAL
MODEL MH 1-XR
ANTENNA TYPE ¼ λ mobile whip antenna
FREQUENCY Tunable by cutting within: 144…175 MHz
(Also applicable: 175…225 MHz)
IMPEDANCE Nom. 50 Ω
POLARIZATION Vertical
GAIN 0 dB (acc. to EIA RS-329-1)
BANDWIDTH ≥ 15 MHz @ SWR ≤ 2.0
SWR ≤ 1.3 @ f. res.
MAX. POWER 150 W
MECHANICAL
MATERIALS Whip:
Black-chromed
Conical stainless steel
Black-chromed brass
Mount:
Black-chromed brass
Weather- and shockproof plastics
Stainless steel
RECOMMENDED
INSTALLATION TORQUE
4 ± 1 Nm
COLOUR Black
HEIGHT Approx. 55 cm
WEIGHT X-version: Approx. 70 g
XP4-version: Approx. 180 g
MM-version: Approx. 300 g
MOUNTING 18 mm dia. hole