WOOD FIREPLACE MANTEL Model #M32-M-HC/MO/U Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 877-886-5989 , 8:00a.m---4:30p.m, EST, Monday-Friday or e-mail customerservice@usaprocom.com.
PRODUCT SPECIFICATIONS 2
PACKAGE CONTENTS If a part is missing or damaged - return to place of purchase (exterior wood components are not replaceable).
HARDWARE CONTENTS Description Part AA Cam Dowel 15 BB Cam Lock 15 ST4 Screw CC Picture (Shown to size) Quantity 1 -9/16 in. 8 WARNINGS AND CAUTIONS WARNING • When tightening screws, do not over tighten, this may cause threads to strip. We recommend using a hand-held screwdriver rather than a power screwdriver. • Do not force screws into holes.
ASSEMBLY INSTRUCTIONS Fig 1 1. Screw the Cam Dowels (AA) into the Left Side Panel (C) and Right Side Panel (D),insert the Cam Locks (BB) into the Panel (B).Attach the Left Side Panel (C) and Right Side Panel (D) to the Panel (B) by tightening the Cam Locks (BB) as shown in Fig 1. Hardware Used AA Cam Dowel ×4 BB Cam Lock ×4 Fig 2 2. Screw the Cam Dowels (AA) into Top (A), insert the Cam Locks (BB) into the Left Side Panel (C), Right Side Panel (D) and the Panel (B).
Fig 3 3. Screw the Cam Dowels (AA) into the Left Side Panel (C) and Right Side Panel (D).Insert Cam Locks (BB) into the Base (E). Attach the Base (E) into assembled frame (C, D) by tightening the Cam Locks (BB) as shown in Fig 3. Hardware Used AA Cam Dowel ×4 BB Cam Lock ×4 Fig 4 4. Fasten the wooden support brackets attached to the Left Side Panel (C) and the Right Side Panel (D) to the Top (A) and the Base (E) with ST4 Screw 1-9/16 in. (II) as shown in Fig 4.
Fig 5 5. After assembling the mantel (A, B, C, D, E), lift upright and push the insert from the front of the mantel as shown in Fig 5. Fig 6 6. Position the fireplace to the desired place as shown in Fig 6.
REPLACEMENT PARTS LIST Part Description Part # Quantity Hardware Package HP004 1 AA Cam Dowel PCAM-023 15 BB Cam Lock PCAM-023 15 CC ST4 Screw 1-9/16 in.
WARRANTY INFORMATION Keep This Warranty IMPORTANT: We urge you to fill out your warranty registration card within TEN (10) days of date of installation, complete with the entire serial number which can be found on the rating plate attached to your product. Retain this portion of the card for your records. Always specify model and serial numbers when communicating with customer service. Always specify model and serial numbers when communicating with customer service.