Freestanding Electric Fireplace Installation Instructions and Homeowner’s Manual WARNING! IF THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED EXACTLY, A FIRE MAY RESULT CAUSING PROPERTY DAMAGE, PERSONAL INJURY OR LOSS OF LIFE.
PLEASE READ THE INSTALLATION & OPERATION INSTRUCTIONS BEFORE USING THIS APPLIANCE IMPORTANT: Read all instructions and warnings carefully before starting installation. Failure to follow these instructions may result in a possible electric shock, fire hazard and will void the warranty. Important instructions ……………………………………………………………………2 General…………………………………………………………………………………..2 Locating Your Electric Fireplace………………………………………………………2 Clearance To Combustibles…………………………………………………………...3 Electrical Connections….
GENERAL 1. Read all instructions before using this appliance. 2. This appliance is hot when in use. To avoid burns, do ventilation or exhaust opening as this may cause not let bare skin touch hot surfaces. Keep electric shock, fire or damage to the appliance. combustible materials, such as furniture, pillows, 14. To prevent fire, do not block air intakes or exhaust bedding, papers, clothes, and curtains at least 3 in any manner. Do not use on soft surfaces, such feet(1m.
CLEARANCE TO COMBUSTIBLES WARNING: Electrical outlet wiring must comply with local building codes and all other applicable regulations to reduce the risk of fire, electrical shock and injury. Back………………50.8mm Sides……………..156.4mm Floor……………. . 0mm Top………………. .610mm WARNIGN: Do not use this fireplace if any part of it has been under water.
MAINTENANCE OF MOTORS The motors used on the fan and flame generator assembly are prelubricated for extended bearing life and require no further lubrication. However, periodic cleaning/vacuuming of the fan/heater Unit is recommended. WARNING: Make sure that the power is turned off before proceeding. GLASS INFORMATION 1.Under no circumstances should this product be operated with missing or broken glass. 2. Do not strike or slam the glass. 3. Do not use abrasive cleaners to clean the glass. 4.
This section provides easy step by step instructions for operating your fireplace. 1. Make sure the unit is unplugged from the power source。 2. Plug the fireplace into a 10AMP/220V outlet. If the cord does not reach, you may use an extension cord rated for a minimum of 1900 watts. To access the controls, open the bottom of the fireplace at the front of the unit (see Figure A). A. MAIN ON/OFF SWITCH The on/off switch supplies power to all fireplace functions (heater/flame). B.
SPECIFICATIONS: Model: V50TYLA-B Model: V50TYLA-W Voltage: 220V/50HZ Total Amps: 6.5A Voltage: 220V/50HZ Total Amps: 6.5A Total Watts: 1350W Heating Ratings: 1200W Total Watts: 1350W Dimensions, CM (H x W X D) Dimensions, CM (H x W X D) Fireplace 97x67x35.9 Fireplace 97x67x35.9 94x74.5x38.9 Carton 94x74.5x38.9 Carton Weight, Kgs Weight, Kgs Fireplace Shipping 33.1 Fireplace 40.4 Shipping ;Model: V50TYLB-D Voltage: Heating Ratings: 1200W 40.
V50TYLA-B、W、WM Item # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 Part Description Part Number Log set Fan/Heater Assembly Synchronization Motor-220Volt AC w/Terminal Cord Power H05VV-F3GX1.
REPLACEMENT PARTS PICTURES OF V50TYLA-B、V50TYLA-W、WM 9 2 7 6 5 4 14 8
V50TYLB-D Item # Part Description 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Log set Fan/Heater Assembly Synchronization Motor-220Volt AC w/Terminal Cord Power H05VV-F3GX1.
REPLACEMENT PARTS PICTURES OF V50TYLB-D 2 9 7 6 5 4 25 10
INSTALLING THE LEGS ● Lay the heater down on its back and install the legs with care on the bottom panel as shown in Figure B (Make sure the vein side is facing forward).
For PRO-COM Electric Fireplace Models PRO-COM (Hereinafter referred to collectively as the “company”) warrants that your new fireplace is free from manufacturing and material defects for a period of one year from the date of installation, subject to the following conditions and limitations: 1. This new PRO-COM product must be installed by a competent, authorized service contractor. The installation must be in accordance with installation and operating instructions furnished with product.