Installation Guide
3
IMPORTANT SAFETY INFORMATION
IMPORTANT: Read this owner’s manual carefully and completely before trying to assemble, operate, or service this heater.
Improper use of this heater can cause serious injury or death from burns, re, explosion, electrical shock, and carbon monoxide
poisoning.
Only a qualied installer, service agent, or local gas supplier may install and service this product.
WARNING: Keep ue open when operating unit.
DANGER: Carbon monoxide poisoning may lead to death!
CARBON MONOXIDE POISONING: Early signs of carbon monoxide poisoning resemble the u with headaches, dizziness, or
nausea. If you have these signs, the log set may not be working properly. Get fresh air immediately! Have log set serviced. Some
people are more affected by carbon monoxide than others. These include pregnant women, people with heart or lung disease,
people who are anemic, those under the inuence of alcohol, and those living in high altitudes.
NATURAL GAS: Natural gas is odorless. An odor-making agent is added to the gas. The odor helps you detect a gas leak. However,
the odor added to the gas can fade. Gas may be present even though no odor exists. Make certain you read and understand all
warnings. Keep this manual for reference. It is your guide to operating this log set safely.
WARNING: Any change to this log set or its controls can be dangerous.
WARNING: This appliance is for installation only in a solid-fuel burning masonry or factory-built replace, constructed of
noncombustible material, and connected to a working ue.
1. This appliance, as supplied, is only for use with the type of gas indicated on the rating plate.This appliance is convertible for use
with propane/LP, using the MANUAL ON/OFF VALVE/SAFETY PILOT KIT.
2. If you smell gas:
● Shut off gas supply
● Do not try to light any appliance
● Do not touch any electrical switches; do not use any phone in your building
● Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's instructions
● If you cannot reach your gas supplier, call the re department
3. Never install the log set:
● In a recreational vehicle
● Where curtains, furniture, clothing, or other ammable objects are less than 42 inches from the front, top, or sides of the log set
● In high trafc areas
● In windy or drafty areas
4. Before installing in a solid fuel burning replace, the chimney ue and re-box must be cleaned of soot, creosote, ashes and
loose paint by a qualied chimney cleaner. Creosote will ignite if highly heated. Inspect chimney ue for damage.
5. You must operate this log set with a re-place screen in place. Make sure replace screen is closed before running log set. If
the replace has glass doors, they must remain OPEN while this log set is in operation.
6. This log set is designed to be smoke- less. If logs ever appear to smoke, turn off appliance and call a qualied service person.
Note: During initial operation, slight smoking could occur due to log curing and the burning of manufacturing residues. You may
wish to add more ventilation by opening a window.
7. Do not allow fans to blow directly into the replace. Avoid any drafts that alter burner ame patterns. Ceiling fans can create
drafts that alter burner ame patterns. Altered burner patterns can increase sooting.
8. Do not use a blower insert, heat exchanger insert, or other accessory not approved for use with this log set.
9. This log set needs fresh, outside air ventilation to run properly. See the Air for Combustion and Ventilation section, page 5.
10. Do not run log set
● where ammable liquids or vapors are used or stored
● under dusty conditions