User's Manual
Table Of Contents
- User’s Guide
- Wireless LAN AP-Router
- Model:
- PW8540IM
- IEEE 802.11b/g
- System Requirement
- Installation Instructions
- Configuring Windows for IP Networking
- Collecting ISP Information
- Setup
- Global Address
- Wireless
- Tools
- Status
- DHCP
- Log
- Statistics
- Printer
- Virtual Servers
- Filters
- IP/URL Block
- Special Apps
- DMZ Host
- MAC Clone
- Dynamic DNS
- Proxy DNS
- SNMP
- Static Routing
- FEDERAL COMMUNICATIONS COMMISSION (FCC) REQUIREMENTS, PART 15
- REGULATORY INFORMATION / DISCLAIMERS
BASIC FUNCTIONS: GLOBAL ADDRESS
FIGURE 3-5: Global Address Page with DMZ Disabled
2. Review the first line in the above figure. It shows the default WAN
IP address which is specified on the Setup page. If your ISP assigns
you an IP address automatically, it will display here.
3. In Line 2 – Line 8, you can list up to 7 additional static, external IP
addresses provided by your ISP.
4. When you have completed editing all the settings, click Apply, or
click Cancel to undo your changes.
To Set up Global Address with DMZ Enabled:
1. Click Global Address on the navigation bar.
The Global Address page with DMZ Enabled appears, seen in
FIGURE 3-6:
Page 16 of 77