User's Manual
Table Of Contents
- User’s Guide
- Wireless LAN AP-Router
- Model:
- PW8540IM
- IEEE 802.11b/g
- System Requirement
- Installation Instructions
- Configuring Windows for IP Networking
- Collecting ISP Information
- Setup
- Global Address
- Wireless
- Tools
- Status
- DHCP
- Log
- Statistics
- Printer
- Virtual Servers
- Filters
- IP/URL Block
- Special Apps
- DMZ Host
- MAC Clone
- Dynamic DNS
- Proxy DNS
- SNMP
- Static Routing
- FEDERAL COMMUNICATIONS COMMISSION (FCC) REQUIREMENTS, PART 15
- REGULATORY INFORMATION / DISCLAIMERS
BASIC FUNCTIONS: GLOBAL ADDRESS
FIGURE 3-6: Global Address Page with DMZ Enabled
2. Review the first line in the above figure. It shows the default WAN
IP address which is specified on the Setup page. If your ISP assigns
you an IP address automatically, it will display here.
3. Next to External - Internal, you can list up to 6 static, external IP
addresses provided by your ISP.
4. Next to External – DMZ, define for your DMZ network up to 6
static, external global IP addresses provided by your ISP.
5. When you have completed editing all the settings, click Apply, or
click Cancel to undo your changes.
To Remove Global Addresses:
Page 17 of 77