User's Manual
Table Of Contents
- User’s Guide
- Wireless LAN AP-Router
- Model:
- PW8540IM
- IEEE 802.11b/g
- System Requirement
- Installation Instructions
- Configuring Windows for IP Networking
- Collecting ISP Information
- Setup
- Global Address
- Wireless
- Tools
- Status
- DHCP
- Log
- Statistics
- Printer
- Virtual Servers
- Filters
- IP/URL Block
- Special Apps
- DMZ Host
- MAC Clone
- Dynamic DNS
- Proxy DNS
- SNMP
- Static Routing
- FEDERAL COMMUNICATIONS COMMISSION (FCC) REQUIREMENTS, PART 15
- REGULATORY INFORMATION / DISCLAIMERS
BASIC FUNCTIONS: TOOLS
Page 28 of 77
#
Tools
On the Tools page, you can:
▪ Change the Administrative Password for Your Router
▪ Restore the Factory Default Configuration
▪ Reset Gateway
▪ Upgrade the Firmware
Important:
▪ We strongly recommend that you change the
administrative password after the first login.
▪ Restoring the default factory settings will reset all of the
router configurations in every page, so we recommend that
you backup the configuration data from the Gateway to
your PC simply using DOS commands. In addition, you can
also restore the factory defaults under the DOS window.
For detailed instructions, see To Backup or Restore the
Configuration Data Using DOS Commands.
▪ If you want to reset the hardware, you need reset the
Gateway.
▪ Before upgrading the firmware, you need download the
firmware image file from the Gateway Web site and save it
to your root local drive first.
To Change the Administrative Password for Your Router:
1. Click Tools on the navigation bar.
The Tools page appears, seen in FIGURE 3-14: