User's Manual
Table Of Contents
- User’s Guide
- Wireless LAN AP-Router
- Model:
- PW8540IM
- IEEE 802.11b/g
- System Requirement
- Installation Instructions
- Configuring Windows for IP Networking
- Collecting ISP Information
- Setup
- Global Address
- Wireless
- Tools
- Status
- DHCP
- Log
- Statistics
- Printer
- Virtual Servers
- Filters
- IP/URL Block
- Special Apps
- DMZ Host
- MAC Clone
- Dynamic DNS
- Proxy DNS
- SNMP
- Static Routing
- FEDERAL COMMUNICATIONS COMMISSION (FCC) REQUIREMENTS, PART 15
- REGULATORY INFORMATION / DISCLAIMERS
BASIC FUNCTIONS: PRINTER
FIGURE 3-26: Printer Page
2. Select Enable next to Print Server.
3. Enter the following information in the boxes:
Parameter Description
Device Name
Unique name of the print server hardware used for
identification purposes. Client PCs in the network
will use it as printing queue name.
Printer Cache
Size
Used for system evaluation. If the printer does not
work properly, you may argument this value, such
as 4096, 8192.
The same value as your printer supports is
recommended.
4. Review the relevant information:
Parameter Description
Printer Server
IP
Shows the IP address of the Printer Server. It
equals to the LAN IP address.
Printer
Shows the Manufacturer and VID (Vendor ID), Model
and PID (Product ID) and Status of the current
printer connected to the device’s USB port.
Page 45 of 77