User's Manual
Table Of Contents
- User’s Guide
- Wireless LAN AP-Router
- Model:
- PW8540IM
- IEEE 802.11b/g
- System Requirement
- Installation Instructions
- Configuring Windows for IP Networking
- Collecting ISP Information
- Setup
- Global Address
- Wireless
- Tools
- Status
- DHCP
- Log
- Statistics
- Printer
- Virtual Servers
- Filters
- IP/URL Block
- Special Apps
- DMZ Host
- MAC Clone
- Dynamic DNS
- Proxy DNS
- SNMP
- Static Routing
- FEDERAL COMMUNICATIONS COMMISSION (FCC) REQUIREMENTS, PART 15
- REGULATORY INFORMATION / DISCLAIMERS
BASIC FUNCTIONS: PRINTER
Command Set
Shows the command set of the printer, i.e., when a
printer is connected to the print server, it will
display here.
5. When you have completed editing all the settings, click Apply, or click
Cancel to undo your changes.
To View the Printing Task Queue:
1. On the Printer page, click Printer Monitor Status.
The Printer Monitor Status Table appears, seen in FIGURE 3-27:
FIGURE 3-27: Printer Monitor Status Table
2. Optional. Click Refresh to see the most current printing tasks.
To Disable the Print Server on Your Router:
1. On the Printer page, click Disable next to Print Server.
2. Click Apply.
Page 46 of 77