User's Manual
Table Of Contents
- User’s Guide
- Wireless LAN AP-Router
- Model:
- PW8540IM
- IEEE 802.11b/g
- System Requirement
- Installation Instructions
- Configuring Windows for IP Networking
- Collecting ISP Information
- Setup
- Global Address
- Wireless
- Tools
- Status
- DHCP
- Log
- Statistics
- Printer
- Virtual Servers
- Filters
- IP/URL Block
- Special Apps
- DMZ Host
- MAC Clone
- Dynamic DNS
- Proxy DNS
- SNMP
- Static Routing
- FEDERAL COMMUNICATIONS COMMISSION (FCC) REQUIREMENTS, PART 15
- REGULATORY INFORMATION / DISCLAIMERS
ADVANCED FUNCTIONS: IP BLOCK
FIGURE 4-6: IP Block Page
2. In Line 1 – Line 6, type the same IP addresses in both IP Block
Starting Address and IP Block Ending Address boxes respectively.
3. Optional. You can click Clear All to conveniently delete all the existing
IP addresses and then do Step 2.
4. When you have completed editing all the IP addresses you want to
block, click Apply, or click Cancel to undo your changes.
To Block a Range of IP Address:
1. Do either of the following:
▪ Click IP/URL Block on the Advanced navigation bar.
▪ If you are on the URL Block page, select IP Block on the upper
of the page.
The IP Block page appears, seen in FIGURE 4-6.
2. In Line 1 – Line 6, type the different IP addresses in both IP Block
Starting Address and IP Block Ending Address boxes respectively.
3. Optional. You can click Clear All to conveniently delete all the existing
IP addresses and then do Step 2.
4. When you have completed editing all the IP addresses you want to
block, click Apply, or click Cancel to undo your changes.
To Block a Specific Domain Name:
Page 56 of 77