User's Manual

ADVANCED FUNCTIONS: SPECIAL APPS
UDP
Session Chaining is enabled.
Specifies whether the session chaining is allowed
on UDP.
Address
Replacement
Allows you to select Enable or Disable only when
Chaining on UDP is enabled.
Specifies whether binary address replacement
should be performed.
Address
Translation
Type
Allows you to select TCP or UDP only when
Address Replacement is enabled.
Specifies whether address translation is performed
on TCP or UDP packets.
Two Way Only
Allows you to select either Enable or Disable.
Specifies that a new session is allowed to be
initiated from the same remote host.
4. When you have completed editing all the settings, click Apply, or click
Cancel to undo your changes.
To Delete Special Applications:
1. On the Special Apps page, for any application you want to delete, type
0 – 0 in the Trigger Port Range box.
2. Click Apply.
Page 62 of 77