Technical data

Procon
. S T  (’)
Essential Parameter Changes Applicable to System Type .
Line ID Description
Default
Setting
New Setting for
This System
H Summer/Winter Changer Over  
H-b
Heating Zone  Flow Sensor Present
{ = NO,  = YES}

H-b
HWS Charging Pump (Standing Operation) {, }
{ = OFF,  = ON}

Potential Parameter Changes Applicable to System Type .
Line ID Description
Default
Setting
New Setting for
This System
H
Minimum  ow setpoint temperature Heating Zone 
( °C ≤ TvSmin ≤ TvSmax)
 As Required
H
Maximum  ow setpoint temperature Heating Zone 
(TvSmin ≤ TvSmax ≤  °C)
 As Required
H-b
Heating Zone  Flow Sensor Present
{ = NO,  = YES}
 As Required
H-b
HWS Charging Pump (Standing Operation) {, }
{ = NO,  = YES}
 As Required
Fig .c – Wiring Diagram for Model 
Notes
* Only  t one type of Room
Temperature Control.
* Parameter Change may be
required.
* Heating Zone 
* Heating Zone , via AGU.
Clip-In Module.
