Use and Care Guide

To order parts:
US: 1.800.851.8900
www.proctorsilex.com
Canada: 1.800.267.2826
Mexico: 800 71 16 100
Parts and Features
How to Dry Iron
NOTE: To dry iron, ensure that there is no water in Water Reservoir.
1. Plug into outlet.
2. Rotate the Adjustable Temperature Dial
clockwise from MIN to select desired
temperature. Allow 2 minutes to reach
desired temperature.
3. Rotate the Adjustable Temperature Dial
counterclockwise until the arm reaches
MIN. Unplug.
How to Steam Iron
w CAUTION
Burn Hazard. Attempting to steam iron on a lower temperature setting or
failing to allow the iron to preheat for 2 minutes can result in hot water dripping from soleplate.
Use untreated tap water. If you have extremely hard water, mix 50% untreated tap water
with 50% distilled water for use in irons.
1. Make sure Iron is unplugged and
Temperature Dial is at MIN. Set Iron
upright on Heel Rest.
2. Open Water Reservoir Fill Door. Using a
cup, slowly pour tap water into opening
to MAX Fill Line.
3. Plug into outlet. Rotate Temperature
Dial clockwise from MIN to desired
temperature in blue steam range using
Temperature Guide. Allow 2 minutes to
reach temperature.
4. To turn off, rotate Temperature Dial
counterclockwise to MIN. Unplug.
4
1. Blast/Spray Buttons
2. Adjustable Temperature Dial with
Blue Steam Indicator
3. Water Reservoir Fill Door
4. Spray Nozzle
5. Soleplate
6. Heel Rest
7. Water Window with MAX and MIN
Fill Lines
8. Temperature Guide
9. Power ON Light