Owners manual

2
IMPORTANT SAFEGUARDS
SAVE THESE INSTRUCTIONS
When using electric appliances, basic
safety precautions should always be
followed, including the following:
1. Read all instructions.
2. To protect against risk of electrical shock,
do not put cord, plug, or mixer body in
water or other liquid.
3. Close supervision is necessary when any
appliance is used by or near children.
4. Unplug from outlet when not in use,
before putting on or taking off parts, and
before cleaning.
5. Avoid contacting moving parts. Keep
hands, hair, and clothing, as well as
spatulas and other utensils, away from
beaters during operation to reduce risk
of injury to persons, and/or damage
to mixer.
6. Remove beaters from mixer before
washing.
7. Do not operate any appliance with a
damaged cord or plug, or after the
appliance malfunctions or is dropped
or damaged in any manner. Call our
toll-free customer service number for
information on examination, electrical
repair, mechanical repair, or adjustment.
8. The use of attachments not
recommended or sold by Hamilton
Beach/Proctor-Silex, Inc. for use with
this model may cause fire, electric
shock, or injury.
9. Do not use outdoors.
10. Do not let cord hang over edge of table
or counter, or touch hot surfaces,
including stove.
11. Do not place on or near a hot gas or
electric burner, or in a heated oven.
12. Check that control is off before plugging
cord into wall outlet. To disconnect, turn
control to OFF, then remove plug from
wall outlet.
13. Do not use appliance for other than
intended purpose.
Other Consumer Safety Information
This appliance is intended for household
use only.
BEFORE FIRST USE: Wash the beaters in
hot, soapy water. Rinse and dry.
WARNING: To reduce risk of personal injury,
always unplug mixer before inserting or
removing beaters.
wWARNING
Shock Hazard
• Do not immerse this appliance in water or other liquid.
• This appliance has a polarized plug (one wide blade) that reduces the risk of electrical
shock. The plug fits only one way into a polarized outlet. Do not defeat the safety
purpose of the plug by modifying the plug in any way or using an adaptor. If the plug
does not fit, reverse the plug. If it still does not fit, have an electrician replace the outlet.