Specifications

2-9
Installing the Switch 5300xl Series
Installation Procedures
Installing the Switch 5300xl
Series
Figure 2-1. Installing a module
Figure 2-2. Tighting module retaining screws
1. insert module into the
guides and slide it in until
it is fully inserted.
“Low-force” connector.
High insertion force is not
needed and should not be
used.
2. then tighten the retaining screws on
the module until they are secure, but do
not overtighten them.
the module is fully inserted when the
module bulkhead is contacting, or
very close to contacting
the face of the switch.