Product guide

Router Redundancy Using XRRP
Displaying XRRP Data
The display also includes all owner router information (instances). Global
information for XRRP is excluded.
The keyword instance can be used to display configuration information for the
virtual router instance(s). If no parameters are specified after this keyword,
the information for all virtual routers is displayed, otherwise the information
for the particular virtual router is displayed by specifying the owner-router-
number and the vlan-id in the command. In the example below, the configura-
tion information for the virtual router number 1 on VLAN 5 is requested.
ProCurve(config)# show xrrp config instance 1 5
Status and Counters - XRRP Virtual Router Configuration Information
Owner Router Number : 1
VLAN ID : 5
Authentication Type : Simple Text Password
Authentication Key : password
Advertise Interval : 5
IP Address Subnet Mask
--------------- -------------- -
10.1.1.1 255.255.248.0
10.2.1.1 255.255.248.0
Figure 12-12.Example of Output for Show XRRP Config Instance [<owner-router-number> <vlan-id>]
Syntax: show xrrp statistics [global |
instance [< owner-router-num > < vlan-id >] |
router < router-num >]
This command displays XRRP status and statistics information.
12-28