Installation guide

System Configuration
Quarantining
3-61
• HP ProCurve switch – See “HP ProCurve Switch” on page 3-73.
• HP ProCurve WESM – See “HP ProCurve WESM” on page 3-76.
• HP ProCurve 420/530 AP – See “HP ProCurve 420 AP or HP ProCurve
530 AP” on page 3-79.
• Nortel – See “Nortel” on page 3-81.
• Other – See “Other” on page 3-83.
7. Click ok.
Testing the Connection to a Device
To test the connection to an 802.1X device:
 NAC 800 home window>>System configuration>>Quarantining>>802.1X
Quarantine method radio button
NOTE: You must have already added devices for them to appear in the 802.1X devices
area. You can also test the device as you add it.
1. In the 802.1X devices area, click edit next to the device you want to test.
The 802.1X device window appears. The Test connection to this device area
is near the bottom of the window:
2. Optional: If you want to include the re-authentication command as part
of the test, select the Re-authenticate an endpoint during test check box
and:
a. Enter the port of the endpoint being tested in the Port text field.
b. Enter the MAC address of the endpoint being tested in the MAC
address text field.
NOTE: You must enter the port, the MAC address, or both, depending on the re-
authentication OID.
Figure 3-27. Add 802.1X Device, Test Connection Area